开云体育

The NanoVNA output with older firmware is around the levels you posted. With Hugen's latest firmware it goes up to 0 dBm. Let's assume you are using the older firmware and you want to get a test level

Please excuse this post if it's been covered previously, but with a nanovna-v2 enroute via tindie, I realized I believe it is not fitted with a battery by default. Is the battery specification (part

All nanovna-h sold by us have version number marks on the PCB. Since rev3.4, we have also added version number marks on the shell labels. hugen

In case it matters - version 0.4.0-2-g7c2f745 No version marking on any of the PCBs as far as I can see (I took off the front and back covers).

Kerr, I have wound these high ratio transformers using FT50-43 and FT37-43 toroids and always found leakage inductance which affected VSWR, Bandwidth and Insertion Loss. I then read about W8JI's

Hi all, I bought a new NanoVNA-H on ebay and received it today. It seems to work, but when I connect it to a laptop using the supplied USB-A to USB-C cable, I get a warning "USB device not recognised.

Hi David, Do you have some information about the maximum dynamic range the pluto can do in sa/tg mode? [email protected]> a écrit :

Ground loop due to residual inductance. EMRFD has a detailed example of what that is and how it can degrade a filter. Experimental Methods for RF Design, ARRL press. Allison ----------------- No

Any idea when it is available at Ebay. I am lazy and would not want to open one more account to somewhere.

Are any these able to show close sidebands. Like what happens with 1kHz or 100Hz SSB modulation

Thanks for the book page image - this is essentially what I have currently breadboarded up although my toroids are wound for 1.5k rather than 3k. I am going to try removing a turn off the primary side

Kerr, Wes Hayward (W7ZOI) did some tests on the NE602 (lower temp range than SA602) and published them in his book Experimental Methods in RF Design. The balance input configuration will give you

ground loop or pcb residual capacitance?

I put it online in pdf because that can be read/viewed by anyone. The pptx format is not compatible with e.g. OpenOffice, and the file is also quite large. If you want the original pptx file, no

...maybe. Since last I posted, I've experimented with a variety of possibilities; none of which worked...8^( But, I reverted back to a message where I mentioned building a filter with half of the

On Mon, Mar 9, 2020 at 07:31 AM, <mcebokli@...> wrote: "... I have the cables and standards from the old one, so no problem there."

This is great, just what I wanted: the same device, but with wider frequency and dynamic ranges. I love the smallness of it, same display as before is OK for me. I have the cables and standards from

I have been reading a bit more about these matching networks and have found another one I think I will try as well. https://www.ece.ucsb.edu/Faculty/rodwell/Classes/ece218b/notes/Resonators.pdf

Resistance (REAL) is a value (at al freqs) and can be plotted on an XY graph on the horizontal axe IMAG is an? reactance value? (L or C) at a specific frequency and can be plotted on an XY graph on

From: jafinch78 . Looks like Signals Everywhere did an overview of mods in his "Adalm Pluto SDR Tutorial: 70Mhz to 6Ghz and Dual Core CPU Modification": https://www.youtube.com/watch?v=5V6CxTBDHVY