开云体育

This is somewhat prompted by a recent question about PC application function/capabilities. Is the (USB Communications) messaging between the nanovna unit and the host PC - 1. Documented? 2. Could be

NOTE: I created this list by reviewing the older Github source code. This is the first iteration and there WILL be mistakes - but it's a starting point for the documentation of the console

Dave, as far as I can tell to this point, there is no ability to enter your own polynomial coefficient of the standards. The unit comes with SOL 3.5 mm and they are described as fairly simple

I've got nanoVNA on order, but don't have it yet. It's not due to at least 4th July, so that's no big surprise. Can anyone tell me if one can change the coefficients of the open/short/load kit? I

Alan, Thanks for message 83. I will try that this morning. Bill

Thank you! The photos are a great help! Bill

See message #83. Alan

Bill, I wrote up a calibration sequence in an earlier thread. If you cannot find it, I will cut and paste in a reply. Currently this was done on the 2 -track unit but I assume the sequence is no

SMA male calibration kit (OPEN / SHORT /LOAD).

These are pictures of calibration. Thank you!

Would someone be willing to publish a pictorial description of the calibration process. I have read thru the English version of the manual (no photos of the Cal process at all) and am unclear how I

Still waiting for my nanovna, but bogus USPS tracking is not at all amazing. I have had packages wrongly reported delivery to my correct address up to 4 days before actual delivery. If you have

I live in Ohio. My nanovna package tracking shows delivery to "Mailbox" in Nebraska on Saturday. USPS "Email Us" site is "temporarily unavailable" and their phone tree is a complete FAIL. I think

Has anyone been able to find an alternative program that works better than NanoVNASharp? It is severely lacking capabilities that the vna itself is capable of reading. An example is VNAJ .

Good to know, thanks. What other settings will the saveconfig command save?

You can store the touch calibration us saveconfig command.

Great and good luck. Have Fun. Best 73' Alan ________________________________ Sent: Sunday, June 30, 2019 7:14 PM To: [email protected] Subject: Re: [nanovna-users] Translated

Workedine. Thanks. Now I can make some tests on some handheld antenas. And in a 4m antenna that was about to build. Best 73

Works very nice. Just measured a NVIS antenna on 40 meters. Spot on with other devices. Suggest putting unit in a black box unless the Sun is hidden by a cloud. For the HF band, suggest store pre

On the calibrate, the firmware routine does not appear quite right. In any case, what I found that works consistent is the following: 1. Select stimulus and start and stop frequency 2. Select