开云体育

I? think that you can just flash the latest firmware, than the config item will show up. Jos Op 16-6-2020 om 01:35 schreef Tom Crawford:

Hi Tom, I recommend bringing your web page to your attention to better understand the possibilities of what can be done with nanoVNA. You can also find help on the group's Wiki and Files pages. I

Hi Thomas, The python modules for me: scipy 1.4.1 pyQT5 5.14.1 pyserial 3.4 numpy 1.18.1 it works with windows7 under 32 bits. The pyQT5 version can be problematic, I don't know about Debian, but

Hello to the group, I have a version (white) which does not have a”Config”selection on the home menu. What might this mean, in terms of version and the ability to upgrade the firmware? Thanks, Tom

Hello. Hugen already has the V2 for sale. Soon it will have a metal casing and 4 inch screen. More info can be found at the /g/NanoVNA-V2/ group. A segunda, 15/06/2020, 23:47, Glen

Hugen, What is the progress of YOUR version of the V2? I am assuming you are working on a 4" V2 version with SD card slot... I am ready to order one. On another subject: I am now using DiSlord's H4

Hi Milo? - Thanks for the feedback! I guess Wiki words were insufficient; adding the screen shot may help..

Hi, I built a Debian package for nanovna-saver (using dh-python) and installed it. However when I try to run I get the following erorr ================= Traceback (most recent call last): File

Hi Bill Nice project. Thanks for the work you put in. I tried to find the Gerbers on OSHPark but I just get an empty page. Have you delisted the project? Regards Gerry

Hello DiSlord; Loaded v 9.3.2 Beta today on my H4 and things are working great. A good example of what open source software can do. Your additions to the unit Menu are easy to access. I will need some

The port 2 input impedance is not perfect 50ohm, this may limit S11 Was this measured at the end of a cable or directly on thenanoVNA?

Hi Oristo, I use the standard MS driver in Win 10. I found in the discussion it should be OK. But I did not know about the flag in Chrome. I enabled it and everything works as expected now. Thank you!

Hi! I'm new to this group and just received my NanoVNA-H. I discovered some issues, and would appreciate the advice of members in this group on the following four questions. Thanks in advance! 1. A

Screen captures here: http://ormpoa.altervista.org/Experimental.png http://ormpoa.altervista.org/cho45.png

I just reverified on Windows 8.1 64-bit Home with Chrome Browser Version 83.0.4103.97 (Official Build) (64-bit) This connects and displays from original worse clone nanoVNA: Another possibility is

Hi Oristo, I use PC and Win 10 64-bit. I tried to copy&paste the link to Chrome and I opened the link in the Wiki also (using Chrome). The result is the same - not found. Should not I enable anything

Herb, thank you. I tried Saver and it works for me. It is up to me now lo learn how to use it :-) Thx, Milo? ---------- P?vodní e-mail ---------- Od: hwalker <herbwalker2476@...> Komu:

Insert SD card, and touch tap on bandwidth text at bottom (i not use menu for select, on screenshot data grab directly from screen and also grab seletcted menu, this not need)

how to take a screenshot in bmp file? firmware NanoVNA H4 v0.9.3.2 beta LSE_Clock

Did you "copy link and paste in PC or Mac Chrome browser", for Enable Experimental Web Platform features, as in the Wiki?