开云体育

Thank You ?Larry. Joe

Yes

Simple question OK NanoVNA-H4 Unit is off and is charging via the USB cable. Red light is flashing I assume meand charging when it is steady and not flashing does that mean it is fully charged? Joe

Hi Arie, read your article with great interest. I understand my nanoVNA, I think, and I understand complex algebra and Z = R + jX. But I get VERY confused by standard radio or ham talk. I made a

Hi dear friends!!! What kind is your nanovna??? I has purchase few days ago a SAA 2 V2.2 but I cant find this option... Can You help me please??? Em 07/02/2022 15:39, DiSlord escreveu:

Coming back on the title, how to measure... I wrote an article about that a couple of months ago, measuring the input impedance of a Elecraft K3 receiver. It was published in the SARC Communicator

When I built my 486DX2 in 92, with huge help, my guru said to get 5x7 spiral-bound recipe card set to act as notes that he'd mention, as we go. It worked great! I had the reference, and writing things

Dave, Slight gaffe on my part... the 100dBuVemf is to calibrate the 60dB over 9 S meter full scale on all Kenwood Transceivers.. The dBuVemf is the kirchoff voltage source for sig generators with 50

Just lurking here, but does anyone actually look at an S meter while operating? Just kind of wondering. I'll admit I mostly do contests, so I'm way too busy to worry about the actual S meter reading.

Yea I kept looking at the data sheet thinking, those dimensions can't be right! As much as wanted to order some to protect my equipment, I quickly realized that it would take a pick-n-place machine to

I believe it. My very old (now) Icom 2100 single band VHF radio is even worse. I've seen the meter go from S1 to S9 with only a 6 to 7 db increase in power from the other end! Just asking, is it

Input regarding Kenwood S-Meters. I have and have rigorously measured the S-Meter input power vs. S-meter indication. It's off the wall for that radio, if there were a wall!! At some points below S-9,

As a reality check for those whose soldering skills might not have kept up to this task (mine for example): The Infineon two terminal part is about the size of Thomas Jefferson’s eyeball on a 2020

OK guys, here's a quick shot I found on the web. don't remember where but hopefully it'll answer your questions. Mike C.

The wiki page Home ( /g/nanovna-users/wiki/12336/159903 ) has been updated by Larry Rothman <nlroth@...>. *Reason:* Added Menu Structure Map links Compare Revisions (

Yep. Printed out a menu map and embellished it with some handwritten notes. For just about every device I have, I also create a "Notes" document, where I add things I find/figure out along the way,

I am with Dragan - I found an article that lacked a complete history and what was there was incorrect. I tried to get it corrected and expanded, but I guess the original author had more clout so all

Asuming you can physically measure the length of the cable or you can cut a smaller length of the cable. This is my way to find the velocity factor using Dislords fw: Measure the length of the cable.

I bought a NanoVNA H-4 and found it good (for my own use). I drew the MENUmap soft.ver. 1.1.01, when the right kind was not found on the Internet (at least for now). The MAP can be found in the Photos

Sorry about my late entry.. just joined. The ripples on the original 70cm VSWR image are the sort of thing regularly seen in microwave waveguide return loss measurements. These RL/VSWR ripples