开云体育

Hi, I keep mine in the nice box it came in. When that starts to wear out I will probably make a case to fit and also hold the accessories. I would probably make it from some kind of wood but I could

Here is what I have been using. Holds Nano, many adapters, some SMA cables and the USB cable fro Saver https://www.harborfreight.com/1800-weatherproof-protective-case-small-64550.html

Ok, those terms don't work, but h4 case does and gets you this: /g/nanovna-users/topic/87708498#25921 YMMV

Some forum members have ordered the Gameboy Advance hard case. Search out messages using those terms for more info. On Thu., 13 Jan. 2022 at 7:45 a.m., Dale - 2W0ODS<dale.robins@...> wrote: I've

You need a step more: enter the approximate frequency of the crystal. It is necessary because being the crystal a very high Q device you must sweep it quite slowly and using much points (1 Hz per

I've bought a few "Hard drive" cases from Amazon, all have stated they have bigger dimensions than the Nanovna-H4 but all have been too small. Has anyone bought one from Amazon that fits? Pictures of

Check out SimSmith http://www.ae6ty.com/Smith_Charts.html I run it on my mac. John, AE0OJ

Dislord (DisKING? master) improvement made quartz measuring nice or even possible. So one question - is that possible (did somebody wrote a piece of soft) to measuer crystals "semi -automatic" What I

Oops - I need to read more carefully before responding. NanoVNA Saver will not do what you want. You have to save the calibration and manually reload it. Also NanoVNA Saver requires that the NanoVNA

Native Instruments LabVIEW Runtime is available for Mac so you should also be able to run Joe Smith's application if you download and install as necessary. You'll have to figure all that out on your

Hi Cliff, Please browse the forum's wiki and user messages for lots of good info on those using Mac's with their Nano On Tue., 11 Jan. 2022 at 11:20 p.m., Cliff<ae5zaham@...> wrote: Is there any

Thanks to all who responded. It looks like nanoVNA-Saver is the one to try. 73, Cliff, AE5ZA

Cliff, Mac user here. I am successfully running the latest version of nanoVNA-Saver on an M1 Mac running Monterey. I installed it using MacPorts. https://github.com/NanoVNA-Saver/nanovna-saver Terry

Hello! I think it could be useful to have an option to display a circle of a given radius (set as the desired SWR value) to quickly check if the Smith's graphic exceedes that limit. Yes, it is

Cliff: This was signed by Larry. /g/nanovna-users/message/5421 Gene KI7LCB

NanoVNASaver: https://github.com/NanoVNA-Saver/nanovna-saver/releases/ 73, Eugen, HB9MDU

Is there any software written that runs on a Mac and connects to the nanoVNA? All I seem to find is Windows only. 73, Cliff, AE5ZA

Thanks for the confirmation, Dragan. And yes, the answers were all for the NanoVNA rather than Saver. Chuck

It seems that everyone is missing the SAVER part. Anyway there is no such feature in the NanoVNA Saver.

I believe it will load Memory 0 on power on so save the calibration to # 0 and it should load it for you on power on. 73, Cliff, AE5ZA