开云体育

Okay. Here's my story: I recently returned a Nano H (the one with 4.0" screen) because although I bought a new one, the one sent was obviously used. In it's place I am awaiting delivery of a Nano-F

QUCS has stripline filter design and simulation capabilities. I haven't used them, but Youtube makes it look possible.

B.A. Schiffman, G.L. Matthaei, "Exact Design of Band-Stop Microwave Filters",/IEEE Transactions on Microwave Theory and Techniques/, January 1964, pp 6-15 They go through the whole cookbook procedure

Hi, I don't have OneOfEleven contact, that's why I write around here. I agree with the good people who enjoy the selfless work of OneOfEleven, that software is spectacular ! I have a Deepelec

Hi Ian, You must have a REALLY small screen for the stop icon to show up as an asterisk!? Have a look at the image for the button defs. Pressing the RECORD button toggles the saving of a single or

Hi Jim, If you want to know more than that, I recommend this link: http://www.gunthard-kraus.de/Ansoft%20Designer%20SV/English%20Tutorial%20Version/index_english.html 73, Gyula HA3HZ -- *** If you are

Thanks Chris! I'll take a look at building this up when I get back to my QTH. 73, Willie N1JBJ

Not sure if this'll help, but: https://hackaday.com/2016/03/23/michael-ossmann-makes-you-an-rf-design-hero/ KiCad apparently can do this... 73, Willie N1JBJ

Hi Larry, DiSlord et al, TCP/IP ... okay, I now understand its purpose. CW mode ... I didn't give signal frequency a thought. Signal Generator uses ... Asterick symbol ... looks to be a black square

Willie, sorry, it took me slightly longer than I thought, but now you can find the antenna part online: https://www.thingiverse.com/thing:4883218 Additionally, I wrote a detailed documentation about

I don't have microwave workbench software.? I need gerber files to make some PCB band stop/reject filters for Langmuir probes.? I assume shorting stubs are the best solution. The first PCB needs

Yes, I believe there is a Firmware update I'm going to try. Chris

I found nanovna server doesn't work on windows 10. It may be the same for nanovna partner... wrote:

Sorry to hear that a few have caused a big loss for so many people, Cathy did a big job !! Jos -- Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware.

Larry - Thanks for the help. The Blue charge LED on my NanoVNA-H4 only flashes when the voltage is very low (under 3.6 volts). When the charger is plugged in the LED stops flashing and goes to steady

Why not try it, please :-) -- *** If you are not part of the solution, then you are the problem. ( http://ha3hz.hu/ ) ***

NanoVna allow external connection over serial ttl Possible use any modules USB to serial BT to serial WiFi to serial For USB and BT windows create vurtual COM port and send data. For WiFi modules need

Ah - if I remember correctly, some users of the newer Nano-H and H4 were able to attach serial to TCPIP adapters to their devices and this is how they accessed them remotely. maybe someone who has

Hi Larry Just 'hover' your mouse pointer on the 2 fields right of 'disconnect'.....

Hi Larry, Do you know the reason why the program is updated no more ? It's such a pity. Greetz, Jos Op 23-6-2021 om 13:42 schreef Larry Rothman: