开云体育

This may be a nit pick to some, but for those of us who learned (correctly) that uppercase = M = Mega = 10^6 and lower case = m = milli = 10^-3, the following: mhz = millihertz or 10E-3 Hertz (1000 Hz

Sorry for the typos...my phone changed the words to make my replies almost gibberish. Even editing changed nothing. Hit 'send', and the words changed and I could not correct them. My apologies.

Issues I have with the Bank VNA-H4, has come from the difficulty getting the PC to recognize the VBA as a valid drive. It ignores the VNA and my latest iteration does have the Micro-sd card access, I

Bluetooth technology is one of the most poorly documented "stuff" around. A techno geek will tell you it is all based on "bluez" library which is prime example of how such simple and undocumented

Hello group; Today I was trying to adjust the 300 Mhz threshold point on my h4 device. Instead of seeing the change I tried to input what I get when I enter the threshold command is threshold {in

NanoVNA use si5351 chip as signal generator On datasheet this chip can work up to 200MHz But can work up to ~300MHz (bigger or less) On frequency near limit generation not stable (an you can see

Normally, these Bluetooth USB extenders just look like a USB hub to the host computer. So you should just plug it in and it should work. The HC5 devices I see on the web look like they're bare

Many new smartphones support only BLE (Bluetooth Low Energy or Bluetooth 4.0), which wants e.g. an HM-10 module.

As you have probably read by now, the actual value is 300MHz +/- something. Very h/w specific. / Gerry

Taking advantage of an advice from One-of-Eleven, I have purchased a Bluetooth module HC5 that I would like connect to my nanoVNA-H (PCB 3.4) in order to remotely control it. As you probably remember,

Thank you Larry. Earlier, I only searched for 297 and only found a couple of hits in the forum, which had very little info. I'll search for threshold this time and read up on Console Command too.

It would be quite simple to do in Python, and would be a powerful new feature for room to add to NanoVNA-Saver. Excellent suggestion. Just a strobing routine at regular intervals would do the trick.

An interesting use for our toys, which could be extended to the Tinysa too. However, (although I am not a programmer of these newfangled devices- (Fortran and Basic 30-40 years ago only), I think that

Hello all, I am new to NanoVNA (very cool) and have had success calibrating, doing basic measurements, and exporting/plotting data in other software. What I'm looking for is a way to log data

Hi Ramon, This is the generator switching to harmonic mode. Search the forum for posts using the term: threshold It's been discussed many times. Read the Console Command document in the files section

When I was taking a graduate level course in electromagnetics quite awhile ago, one of my classmates related to me that her husband said: "it is only three equations, doesn't sound very hard to me!".

A big improvement! Thanks!

Hi all, I just got a NanoVNA-H and on wide span I see big spike at around 297 MHz, that really stands out from the others. Does anybody else see this, is this normal? TIA.

Hello everyone, I was looking on the R&L website and the NANOVNA SAA2N & NANOVNA TINYSA are now listed but out of stock. I contacted R&L and they told me that these two items are on their way and

Yeah, I think I'll put a readme in the zip file explaining again, to save the files to the DefSeDemo bin folder.? BTW, they aren't wrappers - I edited the text in the original DfuSe binary as an