开云体育

I might add that it is not in a case. [email protected]> wrote: -- Paul W8SBH ?? ?? ???? (this too shall pass)

Hans, I believe you may be correct. You've got sharp eyes my friend. ?___ Sent from my two way wrist watch 73 de W3AB/GEO?

Yes, I use mine to make HF and 2 meter antennas too. WO4ROB, Rob WO4ROB ________________________________ Sent: Sunday, May 17, 2020 12:22:07 PM To: [email protected] <[email protected]>

IMHO you are both wrong... The pictures show the VNA with the short and open screwed on. The load is on one of the cables via a F-F adapter. As far as I can make up from the pictures the set is

Thanks, Geo I thought the connectors looked unusual in the photo. I'm sure I already have the adaptors in my radio parts box. I report back how this unit works when I get it. All I want to do is

Michael, You'll need 2 SMA/F - SMA/F adapters to use that one. ?___ Sent from my two way wrist watch 73 de W3AB/GEO?

Here is the cheapest one I have ever seen on Amazon: https://www.amazon.com/gp/product/B085C7B64F/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 $24.89 on Amazon. It doesn't include an open or short

I am making a loop antenna very similar to the OM0ET model, but adding capacitors with switches to add the 60 and 80m bands. I used the nanoVNA to see the resonance and I achieved my goal but with

Thank you, Larry and DiSlord. I must have read that 50 times, and it never got to my memory with out errors. Problem resolved. Thanks, Glenn W3WTE

Just did the test Two mixers rated for 2GHz-4GHz with IF ports 10MHz-2GHz Connect the nanoVNA CH0 and CH1 to the IF ports, LO ports together to a generator at 2350MHz. Filter to measure connected to

I paid 60.00 with tax and shipping from R&L electronics.?Sent via the Samsung Galaxy S10, an AT&T 5G Evolution capable smartphone

The "H4" was $75 plus tax, free shipping

Backup firmware to computer /g/nanovna-users/topic/backup_firmware_to_computer/74035302?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,20,74035302

The DefuSe utility is used to upload and download the flash from the Nano.? On Fri, 15 May 2020 at 8:07 PM, w3wte<g.laser@...> wrote: Hi Group, Is their a way to download the settings I have

Check out the convertors designed for the HP8924 series like the 83236B which converted the PCS band 1.8 GHz to the cellular band (850 MHZ)

Hi Group, Is their a way to download the settings I have created in the NANOVNA to a computer? I have one version of the firmware loaded and calibrated. I would like to down load that version to the

I agree with Mike. Many of the others are knock-offs and may not be supported. ?___ Sent from my two way wrist watch 73 de W3AB/GEO?

Yes herb. You are correct that none of them are "official". I guess my point was that if you get the NanoVNA-F from the aliexpress / Deepelec store you will be guaranteed to get the actual BH5HNU

I received my NANONVA about a week ago. I have been able to analyze antennae and cables. it has a white benzel and appears to have earlier firmware. Is there a 1,2,3... procedure to upgrading the

I just left R&L after picking my new nano vna up. They are running a special on them today for $39.95. Since I get the digest I'm not sure that somebody has brought this up but I would almost bet they