开云体育

Ok, so one last try with USBDeview. In the image you can see where I've highlighted a Port_#002.Hub, SMT32 Bootloader line. However, the very last line is what shows up when I reset and enable DFU on

There is a link in the Wiki.

Can you post the instruction sheet(s) shown behind the unit in the photo? On Sun, Jan 19, 2020 at 10:45 PM, RFy<gpdxdveil@...> wrote: How fast full sweep and how many sweep points on this

Bob, Flash the latest firmware. TDR functionality has been part of most Nano firmware since mid Oct. I know your USB connector is pooched but did you ever buy the STM-Link device I gave you the link

How can I add TDR capability to my early version of the nano?

I've added a screenshot of the display to the Pictures Section Mike N2MS

Mike, You need to think about what you are seeing in the time domain. What the software produces is the impulse response (the positive going blips) and the step response (the steps in your plot) of

/g/nanovna-users/files/NanoVNA%20PC%20Software/NanoVNA-Saver/nvna-s-pve-rev-b.pdf - typos fixed.

On Mon, Jan 20, 2020 at 08:29 AM, Alan G3XAQ wrote: " None of this seems to tell me which hardware version I have received. I've trawled the messages on here and can't see how to find it. "

Well, I did the component changes on my version 3.3 to version 3.4 NanoVNA-H (resistors only). Using my 4 point precission LCR measuring device I measured @ 10kHz? directly on the connectors, VNA

I just had contact with Maggie less then 3 hours ago, and made payment via paypal. Also she sayd its CNY overthere so will be at work again for shipping the goods February 4

The file is there: /g/nanovna-users/files/NanoVNA%20PC%20Software/NanoVNA-Saver nvna-s-pve-rev-a.pdf

OK, Here is the full link: /g/nanovna-users/files/NanoVNA%20PC%20Software/NanoVNA-Saver Folks, When uploading files, please try to NOT use spaces in the filename. Use dashes,

I will test this when I will be home tonight. But this seem to be a very good solution. Pierre VE2PF

Hold down the Alt key then left click, drag the window. HTH Nick G3VNC

Just uploaded into Files/NanoVNA PC Software/NanoVNA-Saver/nvna-s-pve-rev-a.pdf. Documents a no compromise fix for the pyqt5 installation problems recently reported by many users on various Debian

nanoVNA-H4 (using STM32F303CCT6 and 4-inch LCD) arrived today via UPS. Now we need to study and understand the differences compared to the previous version. -- *73, Lucio I0LYL Rome, Italy*

Hi Hugen Just got the NanoVNA-H4 delivered to day. I have some issues which I have raised to the manufacturer as the USB C entry is blocked by the upper half of the case (a rim is not milled away).

Just open it up - its only 4 screws. You will see the board version on the PCB and also will see if D2 is installed or not. Mine arrived a few days ago. PCB is v3.3 and the firmware was dated November

Hi Alan,You most likely have hardware version 3.3 which is OK. V3.4 is the latest and that came out in Dec. You should update to the latest firmware that came out over the weekend. Please review the