开云体育

Hi Rich, it should work with most versions, but I have good experiences with edy555's 0.2.3 firmware: https://github.com/ttrftech/NanoVNA/releases/latest There are instabilities and bugs in firmwares

Hi Rune, I am very happy that your software re-scales everything, even if it does cause a little "jitter" of the graphs' sizes... I use so many software tools that do not re-scale, and everything

Rune, What version of the firmware should I install to use with NanoVNA saver? Rich, WD3C

OK, great. One less thing to test. What are your thoughts on the transient response of the 3v regulator data sheet I've attached. Also, I wonder if you could lower the noise by running from 2 Li cells

Well, has anyone measured the +5 V rail(s) to see how noisy they are? Once that is done the specs for the parts powered by +5 V would need to be looked at to see how noise is too much. DaveD Sent from

Erik, This data seems to suggest that if we had better by-pass capacitors on the 5V supply noise in measurements would be reduced. Would you agree? -- Bryan, WA5VAH

Hi sala nimi, any examples please? Thanks. Have a fun! N.V.

LCD refresh is suspended during measurement

On this Ft measurement, I think you should try to measure the full set of S parameters. This simply means turning the test set (whatever that currently is) around end for end and measure S22 and S12.

Rune has the S11 values converted to Z series complex, real and imaginary. He provides the Q as well and this is the Q series value. You can transform from series to parallel and he does this

Hi Maurizio, I'm glad you're enjoying the new version :-) I agree that calibrations should save the start/stop/segments/averaging. It's a great point. I don't know if I want to overwrite whatever

Hi Martin, I *think* the Cs/Ls you are after is already shown in the marker data display? It's what's shown as "L equiv."/"C equiv." The series resistance is the resistive part of the impedance

A source of inexpensive 50 Ohm adapters. Free shipping, if you don't mind waiting for a slow boat from China:

Hi Norbert, I'll definitely not make a flexible display window for now, as the way the charts are built is not at all compatible with this approach - sorry! Maybe in a far future when everything is

Hi, I used to work for a passive component manufacturer. Had a tiny experience with 0402. Hearing aid manufacturer used an 0402 cap to stop GSM interference. Soldered by hand under a magnifyer.

Erik, How much noise is being produced by the LCD refresh? Are you able to run tests with it against the PCB and unfolded out to the side away from the SMA connectors? Can you disable the LCD routines

Best thing to do is open an issue on cho45's github repo:? https://github.com/cho45/NanoVNA-Web-Client BTW, I see the same security message.

Whenever I start https://cho45.stfuawsc.com/NanoVNA/ from within Chrome browser I get a short message at the bottom flashing up with message "Security error: must be handling a user gesture to show a

Using the console command "sample" it is possible to measure the pure reference, refl and thru signal strength. First picture shows the change over frequency of the reference signals (only look at the

#53 : Upgrade : The [LeastVNA] - after: #48 : ann : update 3 of [LeastVNA] is withdrawn 15 October 2019 /g/nanovna-users/message/4945 - Hello, Allow us, please, to inform you that we