Docs mention quisk_hardware_model.py, but it seems to be an old thing....
¿ªÔÆÌåÓý
Hi Jim, et. al.,
The docs mention this file, but it isn't to be found.? I suspect it is old, based on web searches.? You can find it in the docs.html file under Custom Hardware.? Here is the context:
The quisk_hardware_model.py file shows the basics of hardware control. There is an open() and close() function called once on startup and shutdown. The ChangeMode() and ChangeBand() functions are called when the user changes the mode or band with the corresponding
buttons. The HeartBeat() function is called at about 10 Hz by Quisk. You can put code there to poll a serial port or to perform other housekeeping functions.
73,
Rob
-- Rob Frohne, PhD PE School of Engineering Walla Walla University 100 SW 4th St College Place, WA 99324 (509) 527-2075 |
¿ªÔÆÌåÓý
Oh thanks!? I found it.
I've just about got quisk bth receiving and using the UDP stream? from wsjtx, transmitting FT8 on my little test radio.
73 and thanks again!
Rob
-- Rob Frohne, PhD PE School of Engineering Walla Walla University 100 SW 4th St College Place, WA 99324 (509) 527-2075 From: [email protected] <[email protected]> on behalf of jimahlstrom via groups.io <jahlstr@...>
Sent: Thursday, April 4, 2024 8:33 AM To: [email protected] <[email protected]> Subject: Re: [n2adr-sdr] Docs mention quisk_hardware_model.py, but it seems to be an old thing.... ?
CAUTION: This email originated from outside the Walla Walla University email system.
The file quisk_hardware_model.py is part of the Quisk distribution. It is in the same directory as quisk.py.
Jim N2ADR |
Rob Frohne (KL7NA)