开云体育

I want to try the newest release of quisk with my hermes hardware instead of my peaberry. ?I have a hermes lite also but first want to try the 16 bit board. ?I am not sure how to setup. ?I have a static IP in the hermes and tried putting it in quisk with the radio setup as hermes and don’t get anything. ?I know I am missing something here just don’t know what.

thanks?
ryan
KK6DZB?

I should also mention I am on protocol 2. ?I don’t know if quisk will work with that.?

It's been a long time ago but I think I ran piHPSDR with the Hermes under Protocol 2.

Quisk does not support Hermes Protocol 2 - I also have an ODYSSEY-II programmed as Angelia which runs with piHPSDR.
Quisk will work with the ODY-II with the 100MB firmware.

I did ask Jim if support for Hermes could be included in quisk --- A definite NO.

If you remember, Protocol 2 took a long time from being discussed to being implemented and released -- Support for the Gigabit Ethernet appears not a trivial task.
73 ... Sid.

--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks

Thanks Sid!

I could always put the hermes back to protocol 1. ?I like linhpsdr but it has problems. ?Hermes lite on the other hand was working nicely. ?Tried it last night. ?Side note is there anyway to display frequency of extra receivers? ? I had a second receiver on what I hoped was 7.070 but it’s hard to tell from just the graph if your off 50 or more hz. ?I was listening to 40 meter ssb and decoding psk at the same time.

Ryan?
KK6DZB?

?