Super Quick Test of the Quisk 4.2.35
开云体育
Hi Jim,
Thanks for providing this.? I had to stop playing radio and do some more pressing duties starting about a month ago, so I haven't made any progress since then on my radio.? I still haven't been able to spend much time, but I wanted to test your new version
of Quisk out at least a little.? I was able to open it up and find the new RX and TX Phase adjustments.? I opened the new adjustment window, and played a little.? I wanted to close the window for phase adjustment and found no close box, so I thought maybe
I needed to toggle the RX Phase, but it didn't do anything.? So I closed Quisk, and upon opening it, I can't get the adjustment window back again.
Thanks for working on this for us all.? I especially appreciate it!
73,
Rob
KL7NA
|
||
开云体育
So I got to play again this morning for a few minutes.? I discovered the correction box disappeared because I deselected the sound card as where the RX I and Q data were coming from.? Today I reselected it, but nothing I adjusted had any effect when I adjusted
them in the adjustments window.? My radio gets its data over UDP from an onboard ADC.? It has the I and Q balance problems as if I was using a sound card, but I can't adjust anything.
73,
Rob
KL7NA
From: [email protected] <[email protected]> on behalf of Rob Frohne (KL7NA) via groups.io <rob.frohne@...>
Sent: Monday, July 1, 2024 6:37 PM To: [email protected] <[email protected]> Subject: [n2adr-sdr] Super Quick Test of the Quisk 4.2.35 ?
CAUTION: This email originated from outside the Walla Walla University email system.
Hi Jim,
Thanks for providing this.? I had to stop playing radio and do some more pressing duties starting about a month ago, so I haven't made any progress since then on my radio.? I still haven't been able to spend much time, but I wanted to test your new version
of Quisk out at least a little.? I was able to open it up and find the new RX and TX Phase adjustments.? I opened the new adjustment window, and played a little.? I wanted to close the window for phase adjustment and found no close box, so I thought maybe
I needed to toggle the RX Phase, but it didn't do anything.? So I closed Quisk, and upon opening it, I can't get the adjustment window back again.
Thanks for working on this for us all.? I especially appreciate it!
73,
Rob
KL7NA
|
||
开云体育
Here is another thing that might be important.? When I quit Quisk, this message came up:
Traceback (most recent call last):
? File "/home/frohro/Projects/quisk/quisk_widgets.py", line 592, in OnButton
? ? self.command(event)
? File "/home/frohro/Projects/quisk/configure.py", line 2458, in OnBtnPhase
? ? application.w_phase = QAdjustPhase(self, self.width, rx_tx)
? ? ? ? ? ? ? ? ? ? ? ? ? ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
? File "/home/frohro/Projects/quisk/configure.py", line 859, in __init__
? ? QS.softrock_corrections(1)
? ? ^^^^^^^^^^^^^^^^^^^^^^^
AttributeError: module '_quisk' has no attribute 'softrock_corrections'
73,
Rob
From: [email protected] <[email protected]> on behalf of Rob Frohne (KL7NA) via groups.io <rob.frohne@...>
Sent: Tuesday, July 2, 2024 12:14 PM To: [email protected] <[email protected]> Subject: Re: [n2adr-sdr] Super Quick Test of the Quisk 4.2.35 ?
CAUTION: This email originated from outside the Walla Walla University email system.
So I got to play again this morning for a few minutes.? I discovered the correction box disappeared because I deselected the sound card as where the RX I and Q data were coming from.? Today I reselected it, but nothing I adjusted had any effect when I adjusted
them in the adjustments window.? My radio gets its data over UDP from an onboard ADC.? It has the I and Q balance problems as if I was using a sound card, but I can't adjust anything.
73,
Rob
KL7NA
From: [email protected] <[email protected]> on behalf of Rob Frohne (KL7NA) via groups.io <rob.frohne@...>
Sent: Monday, July 1, 2024 6:37 PM To: [email protected] <[email protected]> Subject: [n2adr-sdr] Super Quick Test of the Quisk 4.2.35 ?
CAUTION: This email originated from outside the Walla Walla University email system.
Hi Jim,
Thanks for providing this.? I had to stop playing radio and do some more pressing duties starting about a month ago, so I haven't made any progress since then on my radio.? I still haven't been able to spend much time, but I wanted to test your new version
of Quisk out at least a little.? I was able to open it up and find the new RX and TX Phase adjustments.? I opened the new adjustment window, and played a little.? I wanted to close the window for phase adjustment and found no close box, so I thought maybe
I needed to toggle the RX Phase, but it didn't do anything.? So I closed Quisk, and upon opening it, I can't get the adjustment window back again.
Thanks for working on this for us all.? I especially appreciate it!
73,
Rob
KL7NA
|
||
开云体育
Hi Jim,
It probably is an installation problem.? Before your recent work on Quisk, I had a fork that I was adding my radio things to.? I went through the procedure to update it with git from your repository.? (That is how I have your latest version.)? Here is a link
to my fork.?
Any suggestions?
Thanks,
Rob
From: [email protected] <[email protected]> on behalf of jimahlstrom via groups.io <jahlstr@...>
Sent: Thursday, July 4, 2024 6:42 AM To: [email protected] <[email protected]> Subject: Re: [n2adr-sdr] Super Quick Test of the Quisk 4.2.35 ?
CAUTION: This email originated from outside the Walla Walla University email system.
File "/home/frohro/Projects/quisk/configure.py", line 859, in __init__
? ? QS.softrock_corrections(1)
This looks like an installation problem. Be sure you are using the latest Quisk. Jim N2ADR |
||
开云体育
Hi Jim,
Thanks for the note.? I'm happy to answer questions about my radio.? The github project is here:?
73,
Rob
From: [email protected] <[email protected]> on behalf of jimahlstrom via groups.io <jahlstr@...>
Sent: Thursday, July 4, 2024 6:41 AM To: [email protected] <[email protected]> Subject: Re: [n2adr-sdr] Super Quick Test of the Quisk 4.2.35 ?
CAUTION: This email originated from outside the Walla Walla University email system.
There is an "Exit" button to quit the screen. Or click the "X" box in the upper right corner.
I don't have the corrections connected to your radio yet; only to the sound card. I need more information. Jim N2ADR |
Rob Frohne (KL7NA)