开云体育

New to Hermes Lite 2 after just receiving the radio last week.? Currently trying to install software.? I would like to use "PowerSDR_mRX_PS_v3.4.9.0" as my software.? But I keep getting the error

I've had this issue for a while, but I need to see if I can get it fixed. I have set the PTT key to ord(' ') and I get the following repeated in the terminal: wx._core.wxAssertionError: C++ assertion

Dick. Pictures says more than words. Here is a screenshot with xdemorserc and quisk sound setup. I have only modified xdemorserc in one place. old was:? hw:0 edited to: hw:1 The system sound is at

Niels, Thank you for your response.? How are you routing the cw audio from Quisk to xdemorse?? That is where I am having problems. 73 Dick w1up

Hi Dick No, but I just had to try xdemorse :-) First I tried installing with sudo apt-get install xdemorse just to find out that I couldn't find xdemorserc. So I installed from source and here is my

Is anyone running xdemorse with an HL-2?? I am having problems with routing the audio from quisk to xdemorse.? Any help or ideas will be appreciated . Thanks, Dick w1up

Thanks Jim, Somewhat unrelated. I do have hamlib rig 2 setup in cqrlog and it is working fine. I also gave JS8call a try for the first time but couldn’t get hamlib to work there so used the serial

Now I understand. The serial CAT was designed to communicate with other programs such as?N1MM+ or WSJT-X. So it creates a virtual serial port with one end connected to Quisk and the other end to the

The remote segfaults are definitely network or cpu lag related. Since I'm running quisk in an ubuntu VM on my control laptop, sometimes it will struggle when plugged into my huge monitor and it's

Not sure it's related, but one cause of crash on Windows, was this illegal ptr to free(): ```diff --- orig-quisk-4.2.15/quisk.c 2022-12-20 22:26:07 +++ quisk.c 2023-01-05 07:16:17 @@ -3101,7 +3101,7

Jim, I should clarify I have the arduino connected to ttys0 physical comport of the computer and just need to read the current frequency in quisk. I am a little confused about how this works. ?I only

I am worried about these segmentation faults. Eric and Ben see them. But Graeme and I do not. I can't fix it if I can't produce the fault. My remote is on the LAN, not WiFi so maybe that is a problem.

Thank you Jim, It works beautifully! I can now run a KiwiSDR on my web browser and Quisk with pulse giving me the ability to switch between either receiver (or both) helping me to beat my S8 local

Thanks Jim, from a Linux user. I'm curious what you did to improve pulseaudio speed. 73, Rob KL7NA

Quisk reads Hamlib commands from the serial port. It does not send Hamlib commands. If you want to send Hamlib commands you need to program the required commands into your custom hardware file. Jim

The Alsa sound driver and the Windows sound driver with the "Fast Sound" option are fast enough to produce a useful sidetone for CW operation. I improved the PulseAudio sound driver to produce a fast

I have also used the same method as Graeme without a problem. One caution if using freedv -- the version included is for x86_64 and not for Pi4 or any other ARM SBC. "git clone

All, I am trying to setup quisk to communicate via ttyS0 to an external device (arduino) to control my amplifiers LPF's.? I have my user name in the dial out already.? In the remote menu I have set

I am using quisk version 4.2.12 in remote mode. The hot key at the control end changes the PTT button to red but doesn't key the transmitter. I changed the code in OnReadSound in quisk.py to fix it.

Is there a way to view the current frequency of the additional receivers?? Very hard to judge viewing only the graph.