开云体育

For Quisk I am using MIDI on Arduino Due. Now I have encoder for VFO and button for PTT (SSB). For CW K3NG keyer is connected to HL2. My idea is to put K3NG keyer into MIDI box. I can see that

Hello Niels, Very thanks for your suggestion. I'm embarrassed.Sorry but I did not study the basics. It works now! I wil continue to experiment. Thanks again! 73 HIdehiko JA9MAT.

Hi Hidehiko Have you changed the quisk "Midi note for CW key" to 64 ? You can enter any number in that field. Your? sparkey.ino sends 64 and my code sends 60 as I read the source. de oz9ny, niels

The link od sparky is as follows, https://github.com/ahopper/sparkey/tree/alternative-midi ja9mat hidehiko.

Thanks dear Niels, I use Pro-micro controller for MIDI and I wrote "sparkey.ino" for MIDI connection. It works on SparkSDR. Maybe this sketch does not avairable for Quisk.? umm... Should I re-make a

Hi Hidehiko Does your? keyer send MIDI ? Here is a small arduino code that reads a morse-key? and sends MIDI to the usb-port. I have not tried on Windows but it works on several linux versions.

Hello Niels, Thanks for reply. I try to set the same setting as you sent but still can not send CW. BTW... Why your "MIDI Control" box is space? I assigned this box to "PTT" but does not send CW.

hi Hidehiko config (for your radio) -> keys See screenshot for my setup. de oz9ny, niels

In Quisk, I don't find the "key" action (CW Transmitting) at MIDI setting like in SparkSDR. I must study about how to "key the CW" in Quisk. 73, Hidehiko JA9MAT.

Sorry...I feel my thinking is fundamentally wrong, so I'll study Quisk's CW transmission. HIdehiko JA9MAT.

Hello Jim, I'm experimenting QUISK CW mode with MIDI-Keyer that is using at SparkSDR. I configure MIDI setting and I assigned "PTT" to MIDI-Keyer. Then the "PTT" turns to "ON" every time I push the

I will change Quisk so that the RfLNA value is persistent, and restored on restart. Meanwhile, if you set "Initial LNA dB" on either the control head or remote you will get what you want. Jim N2ADR

Hello Niels, When using the "old" way, the power settings from the control head are used. With the remote, the power settings from the remote are used. Please make the various power settings on the

Hi Jim I have testet on both linux and windows. The only problem I have is power output from hermes lite. If I connect to quisk the "old" way I get 5W output. With the remote setup I only have 1.8W to

Hello Jim, Many thanks for the new version which seems to be behaving really well. I notice a better than four times reduction in bandwidth at around 55 Kibps and so far through the internet, I have

This is an update to the new Quisk Remote feature by Ben, AC2YD. This version reduces the audio sample rate from 48 ksps to 8 ksps. This should help with slow networks, but is is hard to predict the

Please has anyone managed to get Quisk + Soapy + RSP1A to work together? 73 Bob g3udi

Hello Jim and Ben, I have had this one happen a few times now where the graphical display freezes on the Ctl-Head but the rest of the radio is working. I was a bit more careful with my observation

Hi Jim, We have followed your advice and we've spent some time investigating the CWU issue. We are pretty well convinced that the RIT is being reset to Zero instead of -600 Hz when changing from CWL

Hi Jim, I'm using WSJT-X 2.5.4 also. I just confirmed that the relays do *not* click from band changes from WSJT-X, although the Control Head and Remote Radio band buttons, as well as tuning