开云体育

You are right. I will fix this in the next release. Jim N2ADR

Quisk now has a new option "Fixed tune offset" on the Config/radio/Options screen. This is meant for Softrock radios that need a constant audio frequency to simplify amplitude and phase corrections.

I will fix this in the next release. Jim N2ADR

When clicking on a spot , in this case there should be a change receiver frequency , not the transmitter. Now is transmitter. Command FAxxxxxxxxxxx from Spots window to Quisk.

Hi, I have configured Quisk with the small display option and set the dimensions to 800x480 pixels.? The control panel displays fine but the graph panel over runs the right side of the display. What

Hello All, Thanks.? Quisk is working on a RPi 5 (Bookworm).? No changes were needed to the configuration of the operating system.? Python plays very well is the Wayland engine. I wish to send a BIG

I've created a hardware file for the HL2 controlled by an ICOM RC-28 remote encoder: https://github.com/haklein/quisk-hl2-rc28/blob/main/hermes_hardware.py Maybe that's helpful for someone else, too,

I built my HiQSDR as a standalone box originally with 7" display on Pi3 which was first replaced by an ODROID-C2 and now uses an ODROID-C4 all using quisk. HL2's using home built PiHPSDR v2's. 73 ...

GM I have used several implementations of Quisk/Raspberry Pi, including touch screen, all very successful, all running under Linux.? See my qrz.com page. Current HF station uses dedicated Pi4 plus

Hi, This is most likely my first post to this group.?? We (Multus SDR) are moving to Quisk for our preferred SDR host application for a number of reasons, among them the cross platform

For me this is not a big deal.? If WSJT-X is not installed to a system path everything works fine. -- 73, Stew N8VET

Hi Ron, I don't 100% remember the exact choice presented, but I installed Python to the system path per instructions and then there are usually 2 choices, current user and all users.? I always choose

Hi Stew, When you installed Python what path did it update, the system path or the user path. On my system, python is using the user path. 73, Ron / W4MMP

Hi Jim, Neither command works with WSJT-X installed to path for all users.? I only have one python version installed but gave the second command a go. Just to be clear.? I do have the popup for

You may be using a Config File Radio. First create a new radio and then enter settings for that radio. Jim N2ADR

Hello Stew, Please delete your old Quisk shortcut and create a new shortcut by right-clicking the screen. If there is only one Python on your PC enter the location: pythonw -m quisk If you need to

I have tried all of the normal clicks and keys to fill in the address settings and cannot cause anything to enter. I am using a laptop and cannot figure this out. Thanks Ron Mathis W0RGM

Thank you, that was very helpful. When WSJT-X is installed to the system path it puts its "bin" directory on the path. This directory has DLLs with the same names as Quisk DLLs and creates conflicts.

I added two new color schemes by Michael, DK1MI. The On/Off button color and text color can now be configured. (Michael, send me the final colors). ?There are a few other small changes. Jim N2ADR

Hi Jim, Running the command python quisk.py , Quisk will load properly when WSJT-X is installed to system path for all users. My short cut to run Quisk per your instruction uses, *"Use "quisk.exe" as