开云体育

Hi Jim, et. al., The docs mention this file, but it isn't to be found. I suspect it is old, based on web searches. You can find it in the docs.html file under Custom Hardware. Here is the context: The

Well, one "can" hear in-between, one does not really hear what is between the dots (as pointed out by Jim), but one can observe the band. The following four points should be considered: - this is no

Hello Bob, At 27 wpm the dot length is 44 milliseconds. Listening between dots is a problem with an SDR. Relay changeover including bounce is about 10 msec, and the Rx path has to recover from the

This is a bug. The "Tune" item should appear in the Jog menu and the speed can be set there. I will fix it in the next release but first I must find a Midi device for test. Jim N2ADR

After I defined the MIDI controller, a section "MidiNoteDict" showed up in "quisk_settings.json". Before there was not such section. With the information from message #2771

Please have I got hold of QSK limitations in SDR,? particularly in QUISK? Receive:? before replying I must hear the end of the previous over.? Causality then implies an ultimate limit set by

Seems that I was blind for the drop-down "Midi device name" in the right column yesterday. Perhaps I looked only into the left column or thinking, that the right column is related to CW only. Anyways,

I am trying to use my "Hercules DJControl Compact" together with the MIDI capabilities of Quisk 4.2.30. I tried it on * Windows 10 * Linux Mint I could validate on both platforms, that the

Thanks Neil, I found it. I thought it was on the main Quisk panel with all the other buttons and sliders and I did not look inside the config screen. 73 Pierre FK8IH

Hi Jim, very good to know - thanks! 73 Michael, DK1MI

Hi Pierre, Just in case you haven't found it yet (I just read your question). If you select config using the "Config" button on the screen, then choose the "Config" tab then the "Tx level" slider is

Hi Mario, Thanks for this info and thanks to Michael for his post which reminded me to try it. I now have my VFO knob mapped (on a Serato DJ2GO) to tune. 73, Neil? G4BRK

Hi Mario, Thanks to you I was able to map the VFO knob of my DM4DS Midi controller correctly. Very much appreciated. +1 for adding this to the config screen. 73 Michael, DK1MI

A new option "Tx-Rx silence msec" on the Timing configuration screen controls how long to suppress Rx audio when switching from Tx to Rx. The previous fixed time was 50 msec. The SSB squelch control

Hello Stephen, I will extend squelch to CW in the next release. Please test, as I am a little worried about latency. You may need to turn off squelch once the net starts. Jim N2ADR

Jim, Thanks for your answers. About the last point you don't understand: I read in Config-HL2-Bands-Tx Level the following (i) "This sets the transmit level 0 to 255 for each band. The config screen

Thanks Jim! Rob ________________________________ Sent: Sunday, March 17, 2024 2:05 PM To: [email protected] <[email protected]> Subject: Re: [n2adr-sdr] Quisk Error on pip install (Cannot open

Please see freedvpkg/README.txt for information. Jim N2ADR

I controls the RF low noise amplifier in the HL2. A bandscope display is the whole RF spectrum received by the HL2. I don't understand. Jim N2ADR

This is a good time to train your students to read the documentation. Quisk does not work with Python 3.12. Once there is a version of wx that works with 3.12, and once I get some free time, I will