开云体育

I think I'm past this problem and on to others now. At least I'm getting a spectral display and audio. It is a lot louder that I expected and some other issues I need to look into now. 73, Rob KL7NA

Hi Jim, et. al., I'm working on getting my development testing rig I call the SDR-TRX. It uses the Raspberry Pi Pico W connected to a Linux box running WSJT-X and Quisk using WiFi to be a QRP 20 meter

Thank you Franco Spinelli IW2DHW

I will add Hamilb "l STRENGTH" in the next release. Jim N2ADR

Quisk simulate a netrig model 2 but "l" or \get_level" command is implemented only for AGC and AF with ALC status and audio level. Can be also s-meter value be returned (I suppose with "l STRENGTH")

I found and fixed a bug in the microphone filters that can result in a buffer overrun. You should update Quisk. Some Linux digital programs can not use the usual Quisk Pulse loopback device and must

Hello Jim, many thanks for adding "Tune" as an option for the MIDI jog wheel. I tested it with my Hercules DJControl Compact and it is working fine! -- 73, Joerg - DB2OO

Thanks Jim, That is kind of what I thought. ? I have control for the transceiver working on the UART with the audio cable and sound card and am converting the control so it works on UDP. The basic

The lowest sample rate for Quisk is 48ksps. Jim N2ADR

Hi All, I changed the sample rate to 16 kHz and now I am getting this: dindex -63526.33333 fdecim 0.33333333 dindex -63527.00000 fdecim 0.33333333 dindex -63527.66667 fdecim 0.33333333 dindex

The "Tune" item was missing from the Midi menus. I fixed it but I didn't test it because I did not borrow Ben's Midi controller. Please test it yourself and let me know if it works. The Midi speed can

Oh thanks! I found it. I've just about got quisk bth receiving and using the UDP stream from wsjtx, transmitting FT8 on my little test radio. 73 and thanks again! Rob -- Rob Frohne, PhD PE School of

The file quisk_hardware_model.py is part of the Quisk distribution. It is in the same directory as quisk.py. Jim N2ADR

Thanks for response, bery useful input.? Agree generally.? Can operate OK at 250ms delay in changeover.? Somehow I have got involved with a handful of professionals in cw chatering away at 30wpm

Hi Jim, et. al., The docs mention this file, but it isn't to be found. I suspect it is old, based on web searches. You can find it in the docs.html file under Custom Hardware. Here is the context: The

Well, one "can" hear in-between, one does not really hear what is between the dots (as pointed out by Jim), but one can observe the band. The following four points should be considered: - this is no

Hello Bob, At 27 wpm the dot length is 44 milliseconds. Listening between dots is a problem with an SDR. Relay changeover including bounce is about 10 msec, and the Rx path has to recover from the

This is a bug. The "Tune" item should appear in the Jog menu and the speed can be set there. I will fix it in the next release but first I must find a Midi device for test. Jim N2ADR

After I defined the MIDI controller, a section "MidiNoteDict" showed up in "quisk_settings.json". Before there was not such section. With the information from message #2771

Please have I got hold of QSK limitations in SDR,? particularly in QUISK? Receive:? before replying I must hear the end of the previous over.? Causality then implies an ultimate limit set by