开云体育

I installed Quisk on a raspios-bullseye-i386 system. The default installed version is v.4.1.77 Trying to upgrade I ran in a terminal pip install --upgrade quisk. It starts to install v.4.2.17 then

This is just a test of the possibly broken Markdown support at Group.IO.<br> Lets see if the below Markdown verbatim formatting gets broken again. ``` -------------------------- Error Message

Hi, I fixed the issue now. I found 3 version of Python so deleted them all and re-installed version 3.9.13. Then it works! Apologies for the trouble. 73, Hidehiko JA9MAT.

OK thanks Nick and Jim, I installed the latest Pyhton doubly. This causes problem so I will try to fix it. Sorry for my mistake. Thanks again. 73, HIdehiko JA9MAT.

The instruction requires Python 3.8 or 3.9 or 3.10

Thanks Jim, OK, I installed according to that instruction but the same error appeared. Python and pip version is as follows. --------------------------- PS C:\Users> python --version Python 3.11.1 PS

Hello?Hidehiko, It looks like you are on Windows. Windows is trying to install Quisk and wxPython from the source code. This won't work. Please follow the installation instructions here (

I can verify that the PTT button issue in Linux is fixed (on Fedora 37). Thanks a bunch, this was one big blocker to my portable HL2 project :) -Heath KL0PC

Thanks Jim. I will try to dig into this, but as you say, definitive info is somewhat scarce. Nigel, G4ZAL

Many thanks for the new Split features!! -- Ben, AC2YD --

Thanks for update. I tried but the error appeared as follows; -------------------------- Error Message -------------------------- C:\Users\qrper> pip install --upgrade quisk Collecting quisk Using

I fixed the PTT keyboard shortcut on Linux. The "documentation" link at the top on the Help screen now works on all platforms. The "Split" feature now defaults to 1000 Hz for CW, and 3000 Hz for other

Hello Nigel and Ryan, Quisk sends the filter selection bits to the Hermes address C0 == 9. This is the address of the Alex filters on the J16 interface. You can send any bits you want by specifying

Hello Tom, I will put in a hack for your "hermes_ip" error message, but it may not solve the problem. You could find and delete the file "quisk_settings.json" to delete all your radios and start from

Hi Jim, Here are a couple feature requests for split mode, that I hope will be easy to implement: 1)? Lock Rx freq 2)? For CW (only), default split of 1 KHz (instead of apparent 3 KHz default)

Update!! installed Quisk on a VM but foprgot to set up bridge connection. VM was set for NAT, and did not work. VM needs "bridge connection"

Hi Jim, Thanks for the reply. Hope you had a nice vacation. The traceback capture I attached occurred right after initial installation of Python and Quisk, i.e. when I tried to start Quisk for the

Hello Tom, I am not sure what is going on. Does the traceback happen on the control head or the remote? The remote must be set up as a radio of type HermesLite2. The control head is set up as a radio

Hello Group, I am back from my ski vacation to New Mexico and I will now start fixing all the bugs and requests! Jim N2ADR

Thanks Ben, Thought I installed all dependencies, but missed one. Now to get the Hermes to talk to Quisk! Tried to set the IP and MAC that I had in older version of Quisk, but no go on this version!