开云体育

Have you installed the dependencies (software libraries that Quisk needs to build and run)?? There is a table of required dependencies in: https://james.ahlstrom.name/quisk/docs.html#Installation

Been trying to install Quisk 4.2.16 on Linux Mint 21.1 using the pip install "sudo -H python3 -m pip install --upgrade quisk", but keep getting "building wheel for Quisk (setup.py)... error! error:

I had Quisk 4.2.15 running on my W10 machine with Python 3.10.9. I was trying to set up a Quisk remote Client, however, the prompt and data entry field for the IP address was not displaying on the

Hi, my reply above regarding TRX-DUO lacks some explanation: the measurements in the linked issues is for a Stemlab 16-122 SDR. The values for the TRX-DUO are similar though. The TX sideband noise of

Hi Mario, I used Quisk following a 144MHz Transverter for contesting which has 2 outputs: a) 14 -? 14.5 MHz broadband and b) 9MHz narrowband fixed IF provides by an additional up/down converter and

Hello Mario, The reception quality of Quisk is great of course, and you can run as many instances of Quisk as you want, as I have done it successfully. Though for receiving all HF bands at the same

Hi all, does anybody of you have experience with HPSDR and multiband operation in Quisk? Specifically i am looking for information how good reception of different bands in parallel is working. I want

Hi Lars, As Niels has said, I made a short guide on my blog as a similar problem came up on the HL2 support group... https://groups.google.com/g/hermes-lite My blog...

Hi Lars Nigel, G4ZAL wrote a quick guide here: https://g4zal.blogspot.com/2023/01/quisk-remote-operation.html 73 de oz9ny, Niels

tir. 24. jan. 2023 kl. 21:44 skrev Lars Hansson via groups.io <larsgustavhansson@...>:

Hi. I've been following the exciting remote project in Quisk and I've made many attempts to get it working but I'm stuck. I belong to the group of radio amateurs who will soon move into a apartment

Jim Great! ?Hopefully will test tonight! Ryan KK6DZB

Hi Jim, Enjoy your well deserved ski holidays! Enjoy and take care! 73s, Peter, PA3BIY -- Verstuurd via de myMail-app voor Android zondag, 22 januari 2023, 09:58p.m. +01:00 van jimahlstrom

Hello Group, I am leaving on a ski trip tomorrow, and I have run out of time to make changes to Quisk. I will fix all the remaining bugs when I get back in two weeks. Jim N2ADR

The CAT serial port can now be a real hardware port or a virtual port. See the Config/radio/Remote screen. Please test. Jim N2ADR

I use the FiFi sdr with Quisk (version 4.2.14) on a Raspberry pi 3 (Operating System: Debian GNU/Linux 11 (bullseye), Architecture: arm64). And it works without a problem, but I have to use 96000

I am in a similar situation. ?I am running a newer 16 bit hermes board with homebrew copies of the alex boards and have the same question. ?You can configure quisk in the bands section to switch the

Hi guys! Trying connect fifisdr to quisk under windows 7.But it's not working ((((73 de ur5ydw!

Thanks for the info Nigel.? I will immediately unsubscribe to this forum and subscribe to the one suggested.? BTW, I'm not using DHCP to control this IP address.? It is reserved in my router for

I think this will be a question for Jim, N2ADR. I have an 'old' openHPSDR https://openhpsdr.org/ which is the original modular pre-Hermes SDR with Metis, Mercury, Pennylane, PennyWhistle modules and