开云体育

Hello Dave, I am shipping a FreeDV DLL but it is for 32-bit Windows. I will have to figure out how to make a 64-bit version and how to keep them separate. Jim N2ADR

The soapypkg directory should be there. Does anyone else see that it is missing? Jim N2ADR

Have sorted out my 64 bit version problem. Calling a 64 bit DLL from Python with pointers to data is a bit tedious I must say! As per 32 bit versions Jim, when run under windows 10 with 64 bit Python

Thank you, yes that does the trick. I know that since the Soapy update I have been trying to alter the display. I am sure that I have changed the sample rate, I guess I missed the display change. This

Hello Bob, If you are running Python3, you must make soapy for Python3 too. Use "make soapy3". You also need to install Soapy with the correct bits, either 32 or 64. If your Python2 is 32-bit, and

Thanks Bob, maybe you could just post a pictures / print screen in the config menu, of the tx and rx soapysdr hardware parameters that work with your limemini. I will inspire myself from what works

Hi Peter 1. Using Linux, I have no Windows facility. Using Python2.7: 2. Built Quisk 4.1.48 a little while ago, from quisk-1.4.48.tar.gz 3. Downloaded GNURadio. 4. Downloaded Soapy to give Soapy

Hi Bob, Glad to hear this works for you with the lime mini because Ibhave had no success with the Pluto, QUISK makes it crash in TX mode. Are you using windows or Linux .? What do you mean when you

Hi Jim This probably adds very little but I did have Soapy working fine on Quisk 4.1.48 Tx as well as Rx on Lime mini.? A bit flaky but had qso's on 2m and 70cm.? Lost module on 4.1.51;? I see

That's what I assumed - what threw me was the python error message "OSError: [WinError 193] %1 is not a valid Win32 application" when this is 64 bit and it gave the same message when I tried 32 and 64

When running Python or anything else, the main program and all DLLs must be the same; 32 or 64 bit. That is why Quisk is available for both. You can use either Quisk to work with what you

The frequency range is given by the sample rate. Change that. Jim N2ADR

Hi Jim Update. Tried installing on my main dev machine - same versions but this is 64 bit windows 10. Installed 64 bit version of python 3.8. With this build I can't load a comms dll that the 'LHS

??? ??? Thank you, Dave??????????????? K8EAG????? Gil

Sorry, no. Electronic engineer, ex British Telecom research and ex Mastercard.

So i think this is just a slight mistake .. but seems that soapy is no longer in the subfolders of the .gz on pip site kc7noa1@kc7noa1-Latitude-E5510:~/Downloads/new quisk$ sudo python

??? ??? Wondering if this Dave Roberts was an converter engineer at AC Spark Plug??????????????? K8EAG

Hi Jim Have build 51 running under Python 3.8 on WIndows 10 (32 bit) with G7LHS SDR. Runs fine with a couple of exceptions 1. whilst executing quisk.py directly works, quisk.exe does nothing 2. FDV

I am sure there is a simple way to do this, but so far I have not found it. In using the SDRPlay and RTL-SDR hardware through the Soapy interface how do I change the waterfall and graph to display

I forgot my attachment, sorry... Mike N8OOU