开云体育

Hello Jim,

Could you please give me a little more guidance to implement the "U
TUNER 1" command. I have tried the following ...

Rig command: U TUNER 1
set_func: error = Feature not available
rig_has_set_func called
rig_ext_lookup called
rigctl_parse.c(3291):rigctl_set_func return(-11)

Rig command: U
Func: TUNER
Func Status: 1
set_func: error = Feature not available
rig_has_set_func called
rig_ext_lookup called
rigctl_parse.c(3291):rigctl_set_func return(-11)

... but I think I am getting this wrong. In my remote shack controller,
when I press the tune button, I prepare my autotuner via the internet to
start tuning when it receives sufficient RF (about 0.1 watts will do it)
so I was hoping that at the same time as preparing the autotuner, my
remote controller will send a signal via Hamlib to operate the spot
button on Quisk Ctl-Head. When my autotuner is finished it sends an "I
am done" signal back to my local shack remote controller and I would
like it to send another Hamlib signal to switch off the spot tune.

I think that this is what you have done with the "U TUNER 1" signal and
hope that I have not got this wrong. One QSO on the quisk-4.2.14 with no
issues but not tried the small screen yet. Again thanks for everything.

73, Graeme ZL2APV