开云体育

I would be very interested but I can't find the file.

Hi group! If you're interested, I just uploaded the file "The Growing FLAG", which is a building instruction for my Rotable FLAG-antenna, which is somewhat smaller than traditional FLAG-antennas. I

Mike, It is easy to increase the current, which would improve the IMD, but it will increase the noise. Everett Sent from the all new AOL app for iOS

I have built essentially the same circuit as Everett's and see essentially the same performance. I also wonder how that can be improved. Maybe show some measurements of the current and improved

Thanks Bob. -- Doug Doug Forbes Page <http://sites.google.com/site/dougforbes1/home>

The present commercial LZ1AQ product claims to be "an enhanced and improved version with different active elements (low noise VHF transistors)." The present version of the AAA-1C

The following items have been added to the Files area of the [email protected] group. * /BD3OLH.rar ( /g/loopantennas/files/BD3OLH.rar ) *By:* 钱志豪

In the older original LZ1AQ AAA-1B that i own, the transformer is on a 10 mm diameter blue coated Siemens/TDK Sifferit N30 toroid core, ?i =

Hi Nils,

I think he ist referring to the original schematic on the LZ1AQ website. The transformer there ist trifilar with 18uH each (5 trifilar turns on a toroidal core, u=1000, 10x6x4 mm). He probably

I've been using SDR receivers since the first softrock kits and have several along with classic receivers from AOR,JRC,Drake etc. Here's a couple of my observations. Firstly the available software for

Doug, New F/W on the site page near the bottom: https://airspy.com/airspy-hf-discovery/ 73 Bob

@JohnT... Could I suggest visiting groups.io "mwcircle" where there are many like-minded DXers? There you could find out what a difference SDR makes in the MW context and get more targeted advice on a

Reverse biased diodes in breakdown like Avalanche and Zener-diodes generate noise, a normal diode does it nor or much less. Diode based transistor biasing is frequently used and proven in audio

I suspect that ArnoR has not yet tested an original LZ1AQ amplifier and he did not evaluate it's performance on the bench nor in the field. Some of his judgement seems to be based on simulations and

I would disagree with calling either this circuit or the LZ1AQ circuit differential. Both are two separate amplifier chains fed with a differential signal. The only differential coupling in the

Hello Mike You can PM me here tracey.gardner@... 73s Tracey

Tracey, I didn't see a way to PM you. -- =================================================================== Mike M

Do you have a link to the F/W update you mention. I don't see it on the Airspy site. Thanks Doug WA6VYN -- Doug Doug Forbes Page <http://sites.google.com/site/dougforbes1/home>

Should you not add my suggestion of a Full Wilson Current Source for each of R1 and R2 of present Everett Sharp circuit.? ( On the other hand, one could try the simple single BJT or FET constant