¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Linuxham
  2. Topics

Pre-built Pi 5 binaries

 

My recently purchased Pi-500 arrived yesterday and within an hour I had the OS and all necessary files for building fldigi etal installed.? The build took less than an hour for the entire suite, following?these guidelines:?.

I posted the binary files at

Index of /pi5-files


?
??-?
?2025-05-11 07:491.7M?
?2025-05-11 07:548.7M?
?2025-05-11 07:501.2M?
?2025-05-11 07:566.8M?
?2025-05-11 08:0623M?
?2025-05-11 07:595.0M?
?2025-05-11 08:011.9M?
?2025-05-11 08:5010M?
?2025-05-11 09:1354M?
?2025-05-11 08:543.9M?
?2025-05-11 08:551.7M?

I would like to know if these execute correctly on Pi4/5 64 bit Raspbian OS.? Let me know if you try the posted binaries.

73, David
W1HKJ
 

With RPi-4b - 8gb memory and 250gb SSD, running current version of Bookworm:
Rig is IC-7300
==============================================
?
pi@pi8g:~ $ uname -a
Linux pi8g 6.12.25+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.12.25-1+rpt1 (2025-04-30) aarch64 GNU/Linux
?
==============================================
1. flrig crashes with a segmentation fault on load.
? ? It would not load from the menu, so tried from command line.
?
2. fldigi will not load from menu and when attempted from command line gives the following error:
? ?" bash: /usr/local/bin/fldigi:? cannot execute binary file:? Exec format error "
?
Please advise if you need additional info.
?
Best regards,
Ken
?
Ken Rawlings - KV5Y

On 05/11/2025 8:30 AM MDT Dave, W1HKJ via groups.io <w1hkj25@...> wrote:
?
?
My recently purchased Pi-500 arrived yesterday and within an hour I had the OS and all necessary files for building fldigi etal installed.? The build took less than an hour for the entire suite, following?these guidelines:?.
?
I posted the binary files at

Index of /pi5-files


?
? ? - ?
? 2025-05-11 07:49 1.7M ?
? 2025-05-11 07:54 8.7M ?
? 2025-05-11 07:50 1.2M ?
? 2025-05-11 07:56 6.8M ?
? 2025-05-11 08:06 23M ?
? 2025-05-11 07:59 5.0M ?
? 2025-05-11 08:01 1.9M ?
? 2025-05-11 08:50 10M ?
? 2025-05-11 09:13 54M ?
? 2025-05-11 08:54 3.9M ?
? 2025-05-11 08:55 1.7M ?
I would like to know if these execute correctly on Pi4/5 64 bit Raspbian OS.? Let me know if you try the posted binaries.
?
73, David
W1HKJ
?

 

On 5/11/25 10:30AM, Dave, W1HKJ via groups.io wrote:
My recently purchased Pi-500 arrived yesterday and within an hour I had the OS and all necessary files for building fldigi etal installed.? The build took less than an hour for the entire suite, following?these guidelines: sourceforge.net/p/fldigi/wiki/debian_howto/ < wiki/debian_howto/>.
FYI: The most recent version of Andy's Ham Radio Linux (AHRL) has all of that software available and working on RPI 5 (ideally with 8GB of memory for best results).



73,

Andy

--
Andy Stewart (KB1OIQ)
 

Thanks Ken.? Building on Pi is very easy, but I'm always asked about binary?files.? I'm guessing?a mismatch in some of the OS level shared libraries.

David

On Sun, May 11, 2025 at 8:09?PM kb1oiq via <kb1oiq=[email protected]> wrote:
On 5/11/25 10:30AM, Dave, W1HKJ via wrote:
> My recently purchased Pi-500 arrived yesterday and within an hour I had the OS
> and all necessary files for building fldigi etal installed.? The build took
> less than an hour for the entire suite, following?these guidelines: https://
> <
> wiki/debian_howto/>.

FYI:? The most recent version of Andy's Ham Radio Linux (AHRL) has all of that
software available and working on RPI 5 (ideally with 8GB of memory for best
results).



73,

Andy

--
Andy Stewart (KB1OIQ)
 

Good evening David,
Building from source is my preference, it's easy and gives older hams something to do with their time!!? ?
?
Thanks for all you do!
Ken
?
Ken Rawlings - KV5Y

On 05/11/2025 7:56 PM MDT Dave, W1HKJ via groups.io <w1hkj25@...> wrote:
?
?
Thanks Ken.? Building on Pi is very easy, but I'm always asked about binary?files.? I'm guessing?a mismatch in some of the OS level shared libraries.
?
David

On Sun, May 11, 2025 at 8:09?PM kb1oiq via <kb1oiq=[email protected]> wrote:
On 5/11/25 10:30AM, Dave, W1HKJ via wrote:
> My recently purchased Pi-500 arrived yesterday and within an hour I had the OS
> and all necessary files for building fldigi etal installed.? The build took
> less than an hour for the entire suite, following?these guidelines: https://
> <
> wiki/debian_howto/>.

FYI:? The most recent version of Andy's Ham Radio Linux (AHRL) has all of that
software available and working on RPI 5 (ideally with 8GB of memory for best
results).



73,

Andy

--
Andy Stewart (KB1OIQ)





 

¿ªÔÆÌåÓý


Hey Dave,

Posting just the built ELF binaries with out the required dependencies won't run on people's 64bit Raspberry Pi OS.? The better route would be to build and release a complete .deb package with full dependency tracking.?? This isn't hard to do once you have the packaging file ready which is already done here:??

I'd be happy to take you through it if you're interested and I have a script already that does it all.

--David
KI6ZHD


On 05/11/2025 07:30 AM, Dave, W1HKJ via groups.io wrote:

My recently purchased Pi-500 arrived yesterday and within an hour I had the OS and all necessary files for building fldigi etal installed.? The build took less than an hour for the entire suite, following?these guidelines:?.

I posted the binary files at

Index of /pi5-files


?
? ? - ?
? 2025-05-11 07:49 1.7M ?
? 2025-05-11 07:54 8.7M ?
? 2025-05-11 07:50 1.2M ?
? 2025-05-11 07:56 6.8M ?
? 2025-05-11 08:06 23M ?
? 2025-05-11 07:59 5.0M ?
? 2025-05-11 08:01 1.9M ?
? 2025-05-11 08:50 10M ?
? 2025-05-11 09:13 54M ?
? 2025-05-11 08:54 3.9M ?
? 2025-05-11 08:55 1.7M ?

I would like to know if these execute correctly on Pi4/5 64 bit Raspbian OS.? Let me know if you try the posted binaries.

73, David
W1HKJ

1 - 6 of 6