开云体育

flrig 2.0.05.85 posted (Related to "Bugs? Fldigi 4.2.06.09 witn Flrig 2.0.05.75")

Dave, G?WBX All Messages By This Member #53694 开云体育 Flrig Built just fine on LMDE 6. No trace of a "sticky" PTT issue running Flrig on it's own.? (I spent a minute clicking the PTT button and no stickyness...) But..?? I have had one occurrence when using the "Tune" button in Fldigi 4.2.06.9 (PSK31 mode) and this Flrig alpha. Only ONE occurrence so far, I've spent some minutes clicking the tune (or T/R) button in Fldigi, and so far only that one stuck PTT issue.? (Toggling the "Tune" button, recovered it.) Could there be a way for Flgidi to check the state of Flrig's TX/RX condition after Fldigi transitions from Transmit to Receive, and do something to make things safe or warn the operator??? As it is generally aware of what Flrig does, as it can key the modem (if configured to do so) if it sees Fldigi going into the Transmit state? Is there a possibility of a race condition, relating to the polling periods, between Flrig and the Radio, versus Fldigi and Flrig ? Related (maybe.)? I recall from the past (but can't find it in Fldigi's configuration settings) that there is (or used to be) a setting to delay the modem for a period after going into Transmit.? Is that so, or has my grey cell created a myth? 73. Dave G0WBX.
Joseph Counsil, K?OG All Messages By This Member #53695 Dave, ? That delay setting is in the PTT settings: ? 73, -Joe- K0OG
Dave, G?WBX All Messages By This Member #53702 开云体育 Many Thanks Joe (K0OG) Another of those "Hidden in plain sight" settings! If I put 500 in the start of TX delay, it works fine, but makes the "sticky PTT" issue worse when going back to RX! It's not local RF getting into things issues, as if I pull the TX audio from the soundcard and have the rig working into a load, the sticky PTT issue (when it manifests itself) is just the same, as when radiating RF. Putting 500 (ms) in the PTT End of transmit delay (as well as the above) sort of makes it better! There are so many related settings in both Fldigi and Flrig, I'm wondering if there is some conflict going on.? But what and where? 73 to All. Dave G0WBX. My settings now.? Note, that Flrig is used for Rig control in my shack.

Previous Topic Next Topic