开云体育

Trying to use my Win10 PC to control my AT-1000ProII

Donald Schneider #2224 I am new so if this has an answer I could not find it.? When I bring up Remote Desktop Control on my PC it asks for a PC name.? What is the default name for my tuner?? It is not listed in the tuner manual. Thank you. Device Manager does show the cable with a Silicon Labs driver.
Al Waschka All Messages By This Member #2225 开云体育 Remote Desktop is to control a computer from another computer. ? Al K5TAN ? ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of Donald Schneider via groups.io Sent: Sunday, November 24, 2024 10:12 AM To: [email protected] Subject: [ldgelectronics] Trying to use my Win10 PC to control my AT-1000ProII ? I am new so if this has an answer I could not find it.? When I bring up Remote Desktop Control on my PC it asks for a PC name.? What is the default name for my tuner?? It is not listed in the tuner manual. Thank you. Device Manager does show the cable with a Silicon Labs driver.
Donald Schneider #2226 OK...so how do I use my PC to control my LDG tuner? toggle quoted message Show quoted text On Sun, Nov 24, 2024 at 4:41?PM Al Waschka via <awaschka=[email protected]> wrote: Remote Desktop is to control a computer from another computer. ? Al K5TAN ? ? From: [email protected] <[email protected]> On Behalf Of Donald Schneider via Sent: Sunday, November 24, 2024 10:12 AM To: [email protected] Subject: [ldgelectronics] Trying to use my Win10 PC to control my AT-1000ProII ? I am new so if this has an answer I could not find it.? When I bring up Remote Desktop Control on my PC it asks for a PC name.? What is the default name for my tuner?? It is not listed in the tuner manual. Thank you. Device Manager does show the cable with a Silicon Labs driver.
Micky Corrow All Messages By This Member #2227 开云体育 You can't. Where did you get that idea? Micky K1XH toggle quoted message Show quoted text On 2024-11-24 07:34 PM, Donald Schneider via groups.io wrote: OK...so how do I use my PC to control my LDG tuner? ? ? On Sun, Nov 24, 2024 at 4:41?PM Al Waschka via <awaschka=[email protected]> wrote: Remote Desktop is to control a computer from another computer. ? Al K5TAN ? ? From: [email protected] <[email protected]> On Behalf Of Donald Schneider via Sent: Sunday, November 24, 2024 10:12 AM To: [email protected] Subject: [ldgelectronics] Trying to use my Win10 PC to control my AT-1000ProII ? I am new so if this has an answer I could not find it.? When I bring up Remote Desktop Control on my PC it asks for a PC name.? What is the default name for my tuner?? It is not listed in the tuner manual. Thank you. Device Manager does show the cable with a Silicon Labs driver. ?
Donald Schneider #2228 From the LDG site where it talked about the cable to connect the Tuner to the PC for control using the meter port on the 600 and the 1000. toggle quoted message Show quoted text On Sun, Nov 24, 2024 at 6:42?PM Micky Corrow via <opus=[email protected]> wrote: You can't. Where did you get that idea? Micky K1XH On 2024-11-24 07:34 PM, Donald Schneider via wrote: OK...so how do I use my PC to control my LDG tuner? ? ? On Sun, Nov 24, 2024 at 4:41?PM Al Waschka via <awaschka=[email protected]> wrote: Remote Desktop is to control a computer from another computer. ? Al K5TAN ? ? From: [email protected] <[email protected]> On Behalf Of Donald Schneider via Sent: Sunday, November 24, 2024 10:12 AM To: [email protected] Subject: [ldgelectronics] Trying to use my Win10 PC to control my AT-1000ProII ? I am new so if this has an answer I could not find it.? When I bring up Remote Desktop Control on my PC it asks for a PC name.? What is the default name for my tuner?? It is not listed in the tuner manual. Thank you. Device Manager does show the cable with a Silicon Labs driver. ?
Thomas KF7RSF All Messages By This Member #2229 开云体育 Donald, LDG makes a dedicated control cable that connects from your RADIO to the LDG Tuner. The cable is different depending on make of radio - ICOM, KENWOOD, or YAESU. If ICOM, the tuner is even powered from the radio. When properly connected, radio front panel button can turn tuner on and off, and initiate a tune. Thomas KF7RSF toggle quoted message Show quoted text On Nov 24, 2024, at 5:01?PM, Donald Schneider via groups.io <schneid811@...> wrote: From the LDG site where it talked about the cable to connect the Tuner to the PC for control using the meter port on the 600 and the 1000. <image.png> On Sun, Nov 24, 2024 at 6:42?PM Micky Corrow via <opus=[email protected]> wrote: You can't. Where did you get that idea? Micky K1XH On 2024-11-24 07:34 PM, Donald Schneider via wrote: OK...so how do I use my PC to control my LDG tuner? ? ? On Sun, Nov 24, 2024 at 4:41?PM Al Waschka via <awaschka=[email protected]> wrote: Remote Desktop is to control a computer from another computer. ? Al K5TAN ? ? From: [email protected] <[email protected]> On Behalf Of Donald Schneider via Sent: Sunday, November 24, 2024 10:12 AM To: [email protected] Subject: [ldgelectronics] Trying to use my Win10 PC to control my AT-1000ProII ? I am new so if this has an answer I could not find it.? When I bring up Remote Desktop Control on my PC it asks for a PC name.? What is the default name for my tuner?? It is not listed in the tuner manual. Thank you. Device Manager does show the cable with a Silicon Labs driver. ?
geomad All Messages By This Member #2230 See ?
Emory Haines WM3M All Messages By This Member #2231 LDG sold a control cable for the 1000proii and the 600, but it is discontinued.? The cable had a built in USB device and plugged into the 6 pin port on the back of these two tuners.? There was also a Windows program to use with this device and it controlled these tuners and had a few extra options like switching the tuners to bypass after tuning.? I have both and they work great on my 1000proii.? Do not know of a source for the cable but it is unique and a standard USB device even with the 6 pin din connector does not work.? I think I have the wiring diagram for the cable on an old computer if that would help I can try to find it.? Good luck? 73? Emory? WM3M
Donald Schneider #2232 Thank you for the information.? LDG has the cable information under DOCS for the 1000. But since this is not going to be easy I will just keep doing this manually.? Thanks to all. toggle quoted message Show quoted text On Mon, Nov 25, 2024 at 8:23?AM Emory Haines WM3M via <wm3m73=[email protected]> wrote: LDG sold a control cable for the 1000proii and the 600, but it is discontinued.? The cable had a built in USB device and plugged into the 6 pin port on the back of these two tuners.? There was also a Windows program to use with this device and it controlled these tuners and had a few extra options like switching the tuners to bypass after tuning.? I have both and they work great on my 1000proii.? Do not know of a source for the cable but it is unique and a standard USB device even with the 6 pin din connector does not work.? I think I have the wiring diagram for the cable on an old computer if that would help I can try to find it.? Good luck? 73? Emory? WM3M
N5KBP All Messages By This Member #2233 This has been covered in the past. Due to liability issues at some point in the past the ability to control the AT1000PRO2 and 600 was removed from the firmware. This was instituted due to some operators using it to remotely control the tuner when using QRO power levels. I'm sure this was a liability that LDG did not want to be exposed to. I'm sure that is also the reason they discontinued the external meter since it uses the same TTL port and protocols to communicate. Since the logic is TTL level if you have an older firmware you could easily build a cable with a S-video cable and a usb to ttl adapter.? YMMV de N5KBP
Donald Schneider #2234 Thanks for the explanation. Makes sense to me.? Sorry that I could not find any information when I searched the past. 73 NB5C toggle quoted message Show quoted text On Tue, Nov 26, 2024 at 8:58?AM N5KBP via <martyduplissey=[email protected]> wrote: This has been covered in the past. Due to liability issues at some point in the past the ability to control the AT1000PRO2 and 600 was removed from the firmware. This was instituted due to some operators using it to remotely control the tuner when using QRO power levels. I'm sure this was a liability that LDG did not want to be exposed to. I'm sure that is also the reason they discontinued the external meter since it uses the same TTL port and protocols to communicate. Since the logic is TTL level if you have an older firmware you could easily build a cable with a S-video cable and a usb to ttl adapter.? YMMV de N5KBP
Trent Curtis All Messages By This Member #2235 This explains why I couldn't get the control cable working when I ordered the specific cable and adapter to build it.? Support did not tell me it was disabled via firmware, just it was unsupported... - Trent toggle quoted message Show quoted text On Tue, Nov 26, 2024, 8:58?AM N5KBP via <martyduplissey=[email protected]> wrote: This has been covered in the past. Due to liability issues at some point in the past the ability to control the AT1000PRO2 and 600 was removed from the firmware. This was instituted due to some operators using it to remotely control the tuner when using QRO power levels. I'm sure this was a liability that LDG did not want to be exposed to. I'm sure that is also the reason they discontinued the external meter since it uses the same TTL port and protocols to communicate. Since the logic is TTL level if you have an older firmware you could easily build a cable with a S-video cable and a usb to ttl adapter.? YMMV de N5KBP

Previous Topic Next Topic