Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
AT-1000Pro2 problem
Had a nasty experience with my LDG auto tuner. It¡¯s been working fine for 2 years. Recently my amp has complained a few times about high SWR on 30m after tuning. It tunes ok, but after 10 seconds of tx at 150w the SWR shoots up. I thought it was bad connections and checked everything between shack and antennas. Today the shack smelt bad (burnt electronics!). The culprit is in the attached photo! C5B on the LDG¡
Glad my amp protected itself! Regards Ian |
How much power as the limit on 30 meters is 200 watt as I understand it.
But my question is what kind of antenna??
I have seen this often with End Fed Half Wave antennas as the toriod heats up and then the SWR goes up and possibly out of range of the tuner or the power level inhibits retuning.
I have seen this often enough, especially on FT-8 that I can't recommend them for FT-8. |
¿ªÔÆÌåÓýNot sure quite what happened with mine. It worked fine on all bands except 30m, where it tuned ok with 10w but became unstable with higher power¡I¡¯ll contact LDG tomorrow, but I¡¯ve already sourced the new caps so I¡¯ll probably just sort it myself ? Ian? On 5 Jan 2025, at 16:53, Michael Newbury via groups.io <michael.newbury@...> wrote:
|
to navigate to use esc to dismiss