开云体育

Y-ACC-2 and Y-ACC-3 Cables Available

Gregg Schulz All Messages By This Member #1286 Folks, just got a shipment of Y-ACC-2 and Y-ACC-3 cables in our HRO stores. I know a lot of people have been waiting for LDG to start producing them. Thank you, Gregg
Duane Ridenour All Messages By This Member #1293 Gregg, I'll take one for my Yaesu FT-450D. Duane Ridenour K2HME 864.580.6140 toggle quoted message Show quoted text On Fri, Apr 21, 2023, 12:45 PM Gregg Schulz <W9awx1@...> wrote: Folks, just got a shipment of Y-ACC-2 and Y-ACC-3 cables in our HRO stores. I know a lot of people have been waiting for LDG to start producing them. Thank you, Gregg
Gregg Schulz All Messages By This Member #1302 You can order one from our website. Hamradio.com.?
Elden AI7HL #1303 开云体育 I found the cable to be rather pointless on my FTDX-10. It does not lower the power on the radio when tuning. Sent from iMac toggle quoted message Show quoted text On Apr 25, 2023, at 06:48, Gregg Schulz <W9awx1@...> wrote: You can order one from our website. Hamradio.com.?
N2OG Scott #1309 Hello Elden, I am getting mine today for a FTDX-101D.? I will be pretty upset if my cable does not lower power upon tuning with this Y-ACC-3 cable.? I will then see how well HRO handles returns. Thanks for the heads up. N2OG Scott?
Gregg Schulz All Messages By This Member #1312 According to the LDG website for the YACC3 for the ?FXDX101and DX3000: Supported Radios: FT-dx101, FT-dx3000 Functionality: Pressing the tune button on the tuner changes the mode of the radio to CW (mode change does not appear on some radio display), tunes, then returns the radio to the previous mode. The RF power is lowered while the tuner is tuning. There is no need to change RF power settings before or after tuning. For the YACC2 Y-ACC-2 is a 36″ cable interface between the select Yaesu radios and LDG 100 watt tuners. Does not supply DC to tuner. Connects between the Linear port on the radio and the Radio Interface on the LDG tuner. Supported Radios: FTdx10, FTdx1200 Functionality: Pressing the tune button on the tuner changes the mode of the radio to CW (mode change does not appear on some radio display), tunes, then returns the radio to the previous mode. The RF power is lowered while the tuner is tuning. There is no need to change RF power settings before or after tuning. If they do not do what they say, please post a new message here so the LDG team can see it.? Gregg
Elden AI7HL #1313 开云体育 I have tried the YT-PAC-1200 cable with my AT-200ProII and my FTDX-10. The YT-PAC-1200 cable is the same pinout as the Y-ACC-2. It certainly did not seem to lower the power. I put a power meter inline. I hit the tune button on the tuner and the process started out at 100 watts. It also ended at 100 watts. My belief is… the only reason the power level jumped around in the middle of the tuning process is because of the protection logic in the FTDX-10 that lowers the power due to high SWR. Had the tuner actually lowered the power… I should not have seen 100 watts on my meter at the beginning of the tuning process. Sent from iMac toggle quoted message Show quoted text On Apr 27, 2023, at 12:04, Gregg Schulz <W9awx1@...> wrote: According to the LDG website for the YACC3 for the ?FXDX101and DX3000: Supported Radios: FT-dx101, FT-dx3000 Functionality: Pressing the tune button on the tuner changes the mode of the radio to CW (mode change does not appear on some radio display), tunes, then returns the radio to the previous mode. The RF power is lowered while the tuner is tuning. There is no need to change RF power settings before or after tuning. For the YACC2 Y-ACC-2 is a 36″ cable interface between the select Yaesu radios and LDG 100 watt tuners. Does not supply DC to tuner. Connects between the Linear port on the radio and the Radio Interface on the LDG tuner. Supported Radios: FTdx10, FTdx1200 Functionality: Pressing the tune button on the tuner changes the mode of the radio to CW (mode change does not appear on some radio display), tunes, then returns the radio to the previous mode. The RF power is lowered while the tuner is tuning. There is no need to change RF power settings before or after tuning. If they do not do what they say, please post a new message here so the LDG team can see it.? Gregg
Elden AI7HL #1314 开云体育 Gregg. My bad. After reading your message a bit closer… I see you said that the Y-ACC-2 only works with 100 watt LDG tuners. I guess I’m out of luck with my AT-200ProII.? Sent from iMac toggle quoted message Show quoted text On Apr 27, 2023, at 18:15, Elden AI7HL <ai7hl@...> wrote: I have tried the YT-PAC-1200 cable with my AT-200ProII and my FTDX-10. The YT-PAC-1200 cable is the same pinout as the Y-ACC-2. It certainly did not seem to lower the power. I put a power meter inline. I hit the tune button on the tuner and the process started out at 100 watts. It also ended at 100 watts. My belief is… the only reason the power level jumped around in the middle of the tuning process is because of the protection logic in the FTDX-10 that lowers the power due to high SWR. Had the tuner actually lowered the power… I should not have seen 100 watts on my meter at the beginning of the tuning process. Sent from iMac On Apr 27, 2023, at 12:04, Gregg Schulz <W9awx1@...> wrote: According to the LDG website for the YACC3 for the ?FXDX101and DX3000: Supported Radios: FT-dx101, FT-dx3000 Functionality: Pressing the tune button on the tuner changes the mode of the radio to CW (mode change does not appear on some radio display), tunes, then returns the radio to the previous mode. The RF power is lowered while the tuner is tuning. There is no need to change RF power settings before or after tuning. For the YACC2 Y-ACC-2 is a 36″ cable interface between the select Yaesu radios and LDG 100 watt tuners. Does not supply DC to tuner. Connects between the Linear port on the radio and the Radio Interface on the LDG tuner. Supported Radios: FTdx10, FTdx1200 Functionality: Pressing the tune button on the tuner changes the mode of the radio to CW (mode change does not appear on some radio display), tunes, then returns the radio to the previous mode. The RF power is lowered while the tuner is tuning. There is no need to change RF power settings before or after tuning. If they do not do what they say, please post a new message here so the LDG team can see it.? Gregg
Nate W4NDK All Messages By This Member #2036 Does anyone produce an interface cable for the LDG tuners and Yaesu FTDX10 that connect to the tuner port on the FTDX10 instead of to the Linear port? I need to use the Linear port for a PTT cable from my antenna switch. -- 73 W4NDK Nate
[email protected] #2037 Its now June 2024 I hope they figure it out soon for the at200 pro 2 and the ftdx10
Dave Garber All Messages By This Member #2038 I am using the acc-2? on my dx10 but I do not use an amp sent by ve3wej on samsung s21+ toggle quoted message Show quoted text On Thu, Jun 27, 2024, 7:45?p.m. tbronson158 via <tbronson158=[email protected]> wrote: Its now June 2024 I hope they figure it out soon for the at200 pro 2 and the ftdx10
[email protected] All Messages By This Member #2039 Hi Nate, There used to be a company called BetterRF in NM that had a Tune Control cable that worked like that. From the review site, it looks like they have been out of production for about 10 years. You may be able to pickup a used one. Dwayne WD8OYG
Nate W4NDK All Messages By This Member #2043 Thanks Dwayne! -- 73 W4NDK

Previous Topic Next Topic