开云体育

I recently acquired an RC/RT-600 to replace an AT-600 ProII that I set up remote at the base of my flagpole antenna.? The AT-600 replaced and RT-100 in the same application.? With the RT-600, if I tune on a band, and transmit several times, it does a full tune on the first transmission and a memory tune on the subsequent transmissions.? If I change bands, tune there, and go back to the original band, it does a full tune on the first transmission.? Is this right?? If it is, why does the tuner need 2000 memories?

K5TAN

But wait, there's more.....
On power up, the RT-600 will not tune upon application of RF power, nor will it retain the last good tune.? The SWR is always high right after powering up.? It is as if it always powers up in bypass, and I have to initiate a full tune cycle.? After I do the full tune it operates as expected.? I am receiving 12 volts from my Icom PS-125.