¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Ldgelectronics
  2. Topics

AT-100Pro

 

hello everyone. Looking for FIRMWARE on the pic tuner AT-100Pro screen controller costs pic16f876-20/sp. help out.
[email protected]
 

LDG tuners are not open source.? You would need to contact The Mom And Pop company directly for everything.? Not a big corporation or some mystery China company.

David NE7G
 

I was just reading my AT-200Pro tuner manual; it stated how to read firmware level (button press combination on power connect-read display segments) and that if there was an upgrade you would have to get the chip from them to swap or send the unit in.? I didn't see any current values of firmware anywhere on their site.? Would seem like said above, need to contact them
 

Yes the LDG tuners are not SDR, the firmware is in ROM or PROM, an IC.

Many of their now on the market tuners have been around for a while and I am sure there have been some changes, but I dont LDG offers upgrades of their firmware.

73, ron, n9ee/r

Ron Wright, N9EE/R
Hernando Co ARES EC
Spring Hill, Florida also n9ee55@...


On Monday, March 6, 2023 at 01:02:01 AM EST, MrMark93 <mrmark93@...> wrote:


I was just reading my AT-200Pro tuner manual; it stated how to read firmware level (button press combination on power connect-read display segments) and that if there was an upgrade you would have to get the chip from them to swap or send the unit in.? I didn't see any current values of firmware anywhere on their site.? Would seem like said above, need to contact them

 

Good afternoon. I wrote to support gave the firmware of the main pic controller. the tuner came to life, but the display is not lit, you need to change the display controller - you need firmware for it. I couldn't count from the other one. The request to send was answered - that everything is there and that's it.

1 - 5 of 5