开云体育

Will the cable 108 work on the FT710 ? If so where would you plug the 3.5 mm plug to the radio? I have the Din plug into the turner connection on the radio.
Wyatt

I figured it out and that cable will work. I posted it on the 710 IO group.
Wyatt
WA4VMF

Hi Wyatt

Seems that in the UK there are no cables available.

Do you have the pin out or wiring diagram for your cable so I can solder one up?

Many thanks.

Edd

Hi Wyatt

I wonder if you would post your 8 pin mini din to 3.5mm Jack wiring diagram here?

I am struggling to get my account approved on the FT 710 group for some reason.

Many thanks in advance.

Edd
G7JVJ

EDD
I do not have any diagram of the pin outs but. The LDG-Z100A comes with 7 different cables. Cable 109 goes to the FT10Dx and the 108 works on the FT710. Here is what I posted on the FT710 IO group.

"Just got my LDG Z-100A and got it connected to FT 710 and it works. I use cable 108 and the end that plugs into the 710 the din plug goes into the tuner/Linear then the 3.5 mm plug into the rem port. In the radio menu under operation setting select General then Tun/inport select (Linear) then Tune Type select EXT. I hope this help someone."

Wyatt
WA4VMF

Hi Wyatt.

Many thanks for you comprehensive reply.

I will try and find a stock in the U.K.

All the best.

73's

Do you know if the ic-108 cable will work with the

Here's the IC-108 cable spec from LDG.? This works with my 710 plug the 3/8 connector into Rem and plug the 8-pin din in tuner/amp.? Set the menu to use an external tuner instead of internal and set the other selection (I don't recall the name at the moment) to amp (not tuner).

73 - David, AG4F?