开云体育

Dear LDG-Team, i have a AT-7000 Tuner running on my IC-7000. On my last holiday i build up an 40m vertical Groundplane Antenna which was almost perfectly tuned to 7,02Mhz. To work in the ssb range i

tried it in manual mode as well still no bypass.? I tried different lengths of button presses but doesn't make a difference. For now I am putting my antenna on an a/b switch, one side will go to the

Product: LDG AT1000ProII This tuner, purchased new in January, does not tune with the IC-7610 Tune button. I was given to believe that it would tune with the tune button on Icom radios using the

I am having the same issues on a unit purchased in January. ?I have used it on both the 7300 and the 7610 with the IC-PAC and an IC_PAC-6 factory cable. ?It will not auto-tune with the Icom button.

Ed, Thank you ! Paul *From:* [email protected] <[email protected]> *On Behalf Of *Ed - ad7gr via groups.io *Sent:* Thursday, May 12, 2022 6:01 PM *To:* [email protected]

Leonard, Thank you ! Paul

Paul... Sorry... I hit Send before I added my name and callsign... 73, Ed - ad7gr

Paul, The LDG Z11Pro handles up to 125 watts and requires only 0.1 watts to tune so your 5W would be okay.

None of the LDG tuners require being informed of the frequency. If you go portable you may want to look at the Z11Pro2. For desktop you may want to look at the AT100Pro2. You might even want to

I have a qrp rig (HERMES LITE 2) with 5 watt output.? This is fed into a 125 watt xeigu?amp. Which tuners will work here without the radio informing the tuner of the frequency ? Note: Tho the

I am looking to interface an IC-705 and AT-200Pro. ?Does anyone know the appropriate cable to use? ?Will a standard 3.5mm TRS cable work? Thanks!

On the AT-200Pro you hold FUNC-ANT-TUNE while applying DC power to do a factory reset. ?I don't know if this works on the Pro II or if it will solve your problem, but maybe something to try. Steve

Almost any general purpose PNP transistor would fit there.

Once when my AT-600Pro (not II) seemed stuck in bypass I gave a quick press to the [L UP] button and it came out of it. That worked for me. Good luck OM... 73, Ed - ad7gr

We have at our EOC? station a setup with a ATPro II that? stays in bypass and won't come out. Reading messages in this group, that the? ATPro II?does not do a factory reset??as in other units.

On 5/10/2022 11:46 AM, ei4ew via groups.io wrote: can anyone recommend the correct cable to use with my ftdx101d radio and the ldg z100 plus ei4ew... (It would have nice to have had your name here),

Hi Andryei, thanks for your response, i will refit the transistor and test it again. Regards Snowy G0HZE

Whenever I have had a problem with my LDG tuner(s) I have shipped them back to LDG for repair.. Every time, they have replaced the tuner with a new unit. Even when I burned up an AT100-ProII. Also I

Good Morning Micky from a wet UK, ok whats new about that huh. Thanks to all who pointed me in the right direction. Found the files and printed off the schematic, this, of course, enabled me to

What is the reason to replace it? 2sa1013 should work just fine there. Q3/Q4 is just a switch followed by 12V to 5V converter.