开云体育

On the z100plus, after I found the schematic, the tune button is a single key closure to ground the function is also on the radio interface jack, all thats needed to wire/modify are the indicator

Has there been any thought or discussion of remote locating the control board away from the actual tuner board? There is a 16 conductor ribbon cable of a few inches long that connects the control

On Fri, Nov 18, 2022 at 01:30 PM, cbrabandt wrote: > > I've owned two Pro1000II tuners and one Z-100A tuner. I purchased the > Pro1000 because my Z-100A is near perfection but I wanted more power for

Sorry I missed that question, when you manually tune the C or L manually, you can see every of the 7 bank of relays for each C and L populating with the LEDs. When they are all off, no LED show up and

Thanks, L.B.! I filled out the online form for a custom cable with the requested information and submitted it. Lee Lee Stone, KT4LS Georgia ARES Section Emergency Coordinator Hamshack Hotline:

Thanks! wrote:

Try hammadeparts.com -- WB5YDA L.B. Little President Beaumont Amateur Radio Club

Hello everyone, I've tried to find information on how to recalibrate and retune the internal analog adjustments for power and SWR reading inside the AT-1000PROII but I did not find any procedure on

I downloaded the manual for my LDH 600 watt ProII tuner from their website. Manuals are accessable in the groups section. Paul [email protected]> wrote:

Look in the files section of this group. It is likely: Z-817H.zip </g/ldgelectronics/files/Discontined%20Tuner%20Zips/Z-817H.zip> Best regards, *Kevin Potter * *k5vp*

I purchased an FT-710 on two days ago on Nov 26. I am trying to find a cable to connect either my Z-100Plus or Z-11ProII. The information that I find online is that the Y-ACC-2 cable works with the

I think he is asking for one, not offering one. Michael WA7SKG Dave Tucker Nu4N wrote on 11/28/22 8:11 AM:

Already got one. Finally found it. -- 73's Dave NU4N

Why won't my LDG 1000ProII auto tune in the lower 80m band? Although my 1000ProII often fails to tune as accurately as my Z100-A, it usually brings the SWR down below 2:1 without the need to manually

I already have one. Thanks -- 73's Dave NU4N

Go to the files section /g/ldgelectronics/files Leonard K. Pennock AD7AS Those who walk bravely through life, unafraid of loss or failure, find that they very rarely lose or fail.

Go to the files section /g/ldgelectronics/files Leonard K. Pennock AD7AS Those who walk bravely through life, unafraid of loss or failure, find that they very rarely lose or fail.

Need copy of ldg 817 manual

Purchased an FT 891 with a Z 100 Plus (used) but no operators manual with the Z 100 Plus. YouTube videos are great, but would like to download the manual. The LDG website refey me here. Any advice?

Does anyone have the wiring connections for the 4 pin Icom connector and the wiring connections for the 1/8" plug that plugs into the LDG PROII tuner please.