开云体育

I have the LDG-1000 Pro2. When I turn it off, it switches to the second antenna port. There is no way, as far as I know, to get it to stay on the first port when powering off. If your antenna was set

Hello, I have an AT-100PROII and it works great! ?I use it near the antenna feedpoint most of the time. Is it possible to use the PROII directly with the remote RT-100 tuner rather than the bundled

Good catch, Paul. One more reason why Amateurs should motivate themselves to build their own cables, learn about pin-outs, understand what the logic of each pin does, and in so doing slow the slide

Good evening, According to LDG's website, the Y-ACC-1 does not lower the RF power. ( *"* *This cable does not fold back power (reduce RF).")* However, HRO and Gigaparts are advertising it does. As an

I'm assuming you meant the LDG control was connected to the 7610 but the RF went 7610 to PW1 to LDG. It sounds like the PW1 came up at high power, the LDG tried to tune and thus the smoke. I recall

Yes, I know better than to tune a tuner into a tuner. I have a 200ish feet random wire for generic multi-band use. The tuner in the radio or PW1 won't cut it on this antenna on some bands. I thought I

Thanks Chris

The following files and folders have been uploaded to the Files area of the [email protected] group. * /Current Product Zips/LDG Current Cables/LDG CAT Din 8 Cable Diagram.pdf (

chris@... added folder */Current Product 2024 Manuals* *Description:* The Current Product 2024 Manuals

Thank you Don for the confirmation 73s GD VU2TE Unni [email protected]> wrote:

Unni, Yes the radio saves the tuning setting for every 10 khz. I usually pick the tune button of whatever software I am using to see what the radio's SWR is, then retune if needed. -- 73, Don, NN8B

Thanks, Berry. Will look into it. 73s and regards Unni VU2TE [email protected]> wrote:

Be aware that some adapters offer voltage injection and have cause "blown" fuses in some owners radios. Personally, I use this monitor:Acer 23.8” Full HD 1920 x 1080...

Thank you Don for the details. I am trying to get familiarized with the internal tuner. My fear is, frequent use of an internal tuner may give some problems with its relays. Any way will experiment

Unni, I use both. One of my antennas can be tuned by the ftdx10's limited tuning range (3:1) and another antenna cannot, so I use an external tuner for that one. Both antennas go through the tuner. In

I think it is a VGA socket. ??? VU2TE [email protected]> wrote:

Hi a monitor doesn't have RS 232 Dave 2E0DMB <unnitharakkal@...> wrote:

I got a DELL PC monitor with only one RS232 connector. How I can connect this monitor to my FT Dx10. Any external adaptor RS232 to DVI-D is available ? Thanking all VU2TE Unni

On FT Dx 10 Which tuner is best to use. Rig's internal tuner or useing an external tuner. I am having a AT-200Pro II tuner connected to rig with its recomended cable ? Thankng in advance VU2TE Unni

50% power 3.5 amps [email protected]> wrote: