开云体育

This is exactly what he stated... I have a Yaesu 891 with a LDG Z100A tuner. Recently, my tuner has stopped working. After pressing the tune button, I hear the relays clicking but it stops with three

The tuner didn't find a match. Could be because the radio didn't send a carrier so the tuner wasn't able to do a tune. Leonard K. Pennock AD7AS Those who walk bravely through life, unafraid of loss or

THAT SHOULD MEAN IT HAS PUT SETTINGS IN MEMORY AND OR HAS MATCHED THE ANTENNA TO FREQUENCY HOPE THAT HELPS JAKE - W9BLI ________________________________ Sent: Wednesday, March 6, 2024 11:12 AM To:

Asking for a friend, press tune and it cycles stops and blinks three times. I assume it's the red led. Any idea what's going on? Nothing in the manual for three blinks

Unfortunately no manual fits here. I'm waiting for a new firmware chip from LDG. Possibly a production issue. 73, Peter DF6QT

I don't know what manual is currently shipping with new Z-11ProII units, but the website version of Revision B is accurate as far as I can tell.? All functions in my Z11 duplicate what is stated in

Thank you Alan !!

Anybody care to produce one for the AT-100Pro2? I agree that having to flip through the pages of the manual is not the easiest way and the settings are far from obvious. 73 Dave G3YMC

I printed the cheat sheet. Thanks! Bob. W7DIT

I tired of paging back and forth through the manual to find things. That's not a criticism of the manual. I just didn't want to keep flipping pages all the time. So I created a one-page quick

**UPDATE** Found the issue. ?Bad Coax between radio and tuner. ?The coax was intermittent which is why It worked for a while and then quit. ?Replaced the coax and all is good this morning. Don

Hi i made a cable so the tuner radio port on the tuner is connected to the ftdx 10 so when you press the tune button on the tuner the radio switches to tx and when tuner finds a tune it then stops and

Hi Bob, you're right, they answered me today and i'm awaiting a new firmware. Perfect service , Cheers Peter

I have a nagging issue with my Flex 6400M and LED 100ProII. ?The tuner does not "see" RF. ?The internal ATU on the Flex tunes fine. ?I put the internal ATU in Bypass and attempt to use the LDG and

I recommend contacting ldg@..., they have been very helpful whenever I contacted them. Bob W7DIT >

My AT1000-Pro has 7 various sized TXXX-2 iron ferrite toroids. Thomas

Hello everyone, A question for those in the know... What toroids are used in LDG AT-600PROII? Thanks, -- Eugen - YO9VA

Yesterday i got my first z-11pro2 and i was totally confused about the functions and LED signaling .. . Today got a replacement but same behavior. Seems the rev B manual which comes with the tuner is

Hi, Thank you Phil, I know quite well the capacitors coding, but, as you can see, the working voltage is not printed. In the meantime, I sent an email to the LDG Electronics who offered to send me

DX Enngineering has the shematic for the Y-ACC cable. I will start by making one. Then see about making something to work on one of the other connectors. ------------------- Wayne, AC5V