开云体育

Here is copy of the text I received from LDG regarding a problem with my AT-1000ProII tuner: Hi Roy, I just found out and wanted to let you know that after looking at the data the decision was made to

Here is the response I got from LDG when my new AT-1000ProII would not tune with the tune button on my IC-7300: I just found out and wanted to let you know that after looking at the data the decision

I am working at reviving 600 and 1000 Pro II tuners. The 1o00 just has some fried Caps. The 600 has fried caps and I need to change out a cap near the bridge. Weird is that it is still not showing any

Yes. I wrote that in my previous message because I knew inevitably someone would ask. :-) ” And yes - we both have the External tuner option selected in the DX10 menu - and the radios have been

Here is the response I got from LDG on this subject. ?I wrote to them and told them I purchased a new tuner and my meter no longer worked. ?I said I heard the meter would no longer work with the

I bought this unit to use at the base of my 20' flagpole antenna when I was unsuccessful at bidding on three separate times on eBay for an RT-600.? It was purchased December 24, 2022 and was

Yes the owner told me personally that the port on the tuners built after October 2021 that the port for the meter was disabled, that's why my meter would not work one the new replacement they sent me.

That is great James. I have looked at Palstar Auto Tuners too. I do have a manual Palstar and it tunes wires, zepps, verticals, everything I have thrown at it. Solid state amps are not forgiving of

Hi Phil, I posted on here months ago as I was just getting blank answers the top dealers over here, I emailed LDG and got no replies so as it happens I had given up and ordered my second choice which

I use the Z817 with my FT817 and the LDG supplied cable and all works fine.? I use the TUNE button on the Z817 to force the tuning.? I do have the control cable supplied by LDG for the FT817. 73,

My AT-1000pro works fine with the M-1000 meter (I own one) but I installed a Wavenode-2 and its software between the amplifier output and tuner also to make sure I get accurate readings (+- 5%) and

I just bought new AT-1000proII couple weeks ago from Gigaparts and the meter port works with the USB device LDG use to sell and it also works with the software for their tuners with meter ports.? I

I tried for ages to get an answer from anyone in the UK regarding the 1000 Tuner and the Meter, After months of waiting I got an e-mail out of the blue stating that it would only work with the old 100

I have been told by LDG this is not true. All 1000 tuners support the M-1000 meter. ?Have you been told otherwise by LDG?

Dear ALL, as an update about this topic: I returned the unit to WIMO, where I bought the device. They checked it out with a FT-818 ND that they had and made a video. I truned put that the device

Under files, discontinued tuner zips. Mike N3PM

Al, Is the RT-600 one available? It is currently not on file. 73!

you did not mention, does it work, but no display shows?? did you look for poor solder connection Dave Garber VE3WEJ / VE3IE [email protected]> wrote:

I confirm that the voltages are correct based on the wiring diagram. I think the problem is in the led panel.

did you check the power coming in and the source of where the power is coming from and the voltage on the cord supplying the power(wall wart if used)