开云体育

Does anyone know if the M-1000 meter will become available again? Or is a replacement planned? I can’t find one at any dealers in Europe. Would like one to match my At-1000 pro2. ? regards Ian

I have an LDG 600 ProII. I had it in manual mode which I had to retune everytime I changed bands. This worked well for me. Reading the service manual I *learned how to put it in automatic mode. I did

I was just reading my AT-200Pro tuner manual; it stated how to read firmware level (button press combination on power connect-read display segments) and that if there was an upgrade you would have to

in? the files section of this group is file called? "LDG tech notes" it is zip file ...in here is method for calibration which only address swr calibration\ BUT swr is what drives auto tune

it is an original unit and with the board being worked on the bench, some of the controls on the PCBA might have been altered (unknown). Hence, if there is a procedure I would like to use it to

I doubt that changing a relay would require recalibration. At worst the unit has to have the memory cleared so that the attempts to tune with the correction switched in by the relay would be

I don’t have an answer for you, but just another question. Changing a RELAY requires a RECALIBRATION on the RT-600? Vy73 - Mike - KD5KC. El Paso, Texas - DM61rt. SOTA W5T-Texas Association Manager.

I have the RT600 remote tuner which I just replaced a burnt relay and would like to perform a calibration procedure prior to putting it back into service. Can anyone provide me the calibration

I recently acquired an RC/RT-600 to replace an AT-600 ProII that I set up remote at the base of my flagpole antenna.? The AT-600 replaced and RT-100 in the same application.? With the RT-600, if I

LDG tuners are not open source.? You would need to contact The Mom And Pop company directly for everything.? Not a big corporation or some mystery China company. David NE7G

hello everyone. Looking for FIRMWARE on the pic tuner AT-100Pro screen controller costs pic16f876-20/sp. help out.

it has been sold.... Paul K3SF

Hello, If anybody has an RT600 with RC600 for sale, please let me know. Tnx es 73 de NE7EE

Has the tuner been sold or is it still available? Tnx es 73 NE7EE

Steve – When I first set it up, I felt the same. But now that I’ve used it for a while, it seems natural to hold the button for a second and the issue is gone. I seldom use bypass and virtually

Memory tune on the LDG AT-897 Plus tuner is done by holding the TUNE button until the LED comes ON. Perhaps this is also possible on other LDG tuners. Perhaps not. (The AT-897 tuners were only

Lyn, I have also been wondering about the bypass/quick/full tune button setup since the AT series was introduced - very awkward function combination! ?The timing gap between a quick tap to bypass and

Sorry, misunderstood question. My early reply was in reference to using ALE.? When scanning with ALE you would want the tuner to go to bypass after sounding/transmitting.? If tuner remains in line

A momentary (very quick) press of the TUNE button puts the AT-600 into Bypass mode, whether you just tuned it or not. The question is, if you need it to tune, why would you want it to subsequently go

As far as I know the AT-600 and 1000 do not go into bypass after tuning, wish they did. The only way I have got them to go into bypass after tuning is to use the other ALE program, connect the LDG USB