|
L400 haulout Vanuatu, Solomons, Fiji
3
I'm looking for recommendations for haulout locations in Vanuatu, Solomons, Fiji area. I have a DIY through hull to install and maybe bottom paint job if it is reasonably priced.
|
|
Lagoon Factory parts
4
#ownersversion
Can anyone with experience with the Lagoon Factory recommend a site or contact to buy parts for a 38 Lagoon? I haven't had any good luck looking on my end. Good sailing James R
|
|
Lagoon 38 S Through Hulls
#380s2
I have a 2006 38 S Clarity / soon to haul out with original though hulls. So time to replace ,I don't know the specs of the through hulls size or lengths. Can any one pass on whom is best to contact for information & purchase? I am in the West coast states to purchase. Smooth sailing Captains James R Clarity
|
|
2011 Lagoon 450 Standing Rigging
8
Has anyone recently had their standing rigging replaced and if so where did you have the work done and what did it cost? I received a quote for 24K. Thanks!
|
|
|
|
L380 Large Windows
3
Has anyone sourced the large windows on the L380 (2007)? The factory price has just doubled (now ?1000 each delivered!) and I thought I'd look into sourcing them from elsewhere. I've got the outline dimensions but I wonder if anyone knows what the thickness is? Also is the material anything special or just acrylic? Clive Lady Caroline L380 S2 #420
|
|
410 Enclosure
On my 2004 410 I have line sail bags made by a company called NV Industries. When I went to their site low and behold they make enclosures for several Lagoons as well. https://www.nvequipment.com/en/boat-protection-lagoon/cockpit-canvas-lagoon-410-avec-hard-top-94811.php I didn¡¯t find my bags on the site, a mesh, but the enclosure looked good and damn cheap! Has anyone dealt with this company (French) and if so is there a US supplier you know of? Again their site was hard to follow and didn¡¯t indicate a supplier here in the states. Steve in Solomons MD 410 S2 E
|
|
We have a leak in one of the salon top grab rails. Water enters and leaks into the salon from one of the backing cover plates. Has anyone any ideas on removing the backing plate without damaging it? here's a photo. thanks, tim and tracey sv folie a deux 2000 lagoon 380 #47
|
|
sugar scoop rub rail replacement
4
Has anyone else replaced the rub rail on their sugar scoops? Anything I should know or do? Was wondering if there was a sealant or adhesive I should be using. Thanks in advance, Steve in Solomons, MD 2004 410 S2 E
|
|
Recessed puck lights
Hi..I am looking for a source for the puck lights for the L420 2007. These are the ones overhead of the births and have a little switch. They are tension mounted in the ceiling. I can find similar lights, but none with switches. Thanks Vicky Lohman L420 Ohana Kai
|
|
Lagoon 440 cabin window film
3
Hi all I am looking to replace the film on the 4 main hull windows for each cabin. Has anyone removed the exsiting film, if so what is the best way to do it? Cheers Rex
|
|
Replace Dripless Seal and Thrust Bearing on Lagoon Powercat
#ownersversion
I need to replace the thrust bearings and dripless seals on my 2004 Lagoon 43 PC. While I'm pulling the prop shaft, I'll also replace the cutlass bearing. From what I understand, this is a fairly common problem. Unfortunately, Lagoon doesn't offer support for boats of this age. Can anyone help me with some instructions and manufacturer's part numbers? I've located a supplier for PSS dripless seals, but could use help with locating a supplier for the thrust bearings and cutlass bearings. Chris Greene Amphitrite Hull #FR-CNB43044G304
|
|
Jabsco twist and lock manual toilet size on 380 S2
5
Need to replace this. Actually thinking about putting in a raritan, but don't know if it fits. Actually need to rebuild pump etc on mine, but rebuild kit is $80, and new toilet is 180, so just simpler to put in a new one. However, what I need to know if it is the compact or regular bowl size. I am away from the boat and can't find this info easily. Thanks.
|
|
Electric Drives
5
I¡¯m thinking of repowering my 2003 Lagoon 380 with BellMarine electric drives and lead crystal batteries and 48 volt diesel generators. Does anyone have experience with electric drives?
|
|
2016 Lagoon changing hands
I'm a delivery skipper who often works with Lagoon owners, and new owners. I'm seeking advice on out of the water repairs, additions, etc for new owners of a 2016 Lagoon 450 s. She was last out of the water when she arrived from France in early 2017. Thanks for your responses. Larry
|
|
After a lightning strike on the mast of a nearby boat in our marina, the charge propagated and caused damage to several nearby boats, some severe. When I returned to my boat, I found damage including the starboard aft Gulper shower sump pump was running continuously with no water in the sump. I disconnected the red lead from the shower pump relay referenced above to turn off the sump pump (Scheiber Ref. 36.16112.00). I am thinking the shower relay was damaged by stray current and I must replace it. I cannot find it in the Beneteau catalog, but I found it elsewhere online for $119. Please, before I experiment by replacing this relay, does someone have a better idea? Thank you, fair winds, Gary 2008 Lagoon 420
|
|
Yanmar 40 hp/SD50 seawater leak
5
My starboard engine ends up with the cavity underneath the engine full of seawater and overflowing into the bilge after an hour or two motoring at 2300 rpm. I thought it was the salt water pump, but had it rebuilt and there's no evidence of water around it. The water outlet from the sail drive looks dry and no apparent leaks in the hoses to and from the heat exchanger. No water collects when docked, so I think the SD membrane is OK. Any ideas where water might be coming from the bottom of the engine so as to end up in the cavity underneath or, possibly, from the forward part of the sail drive which would drain into the cavity?
|
|
Lagoon 440 volvo penta d2-75 propeller size
#'s
Hello everyone, our Lagoon 440 hull 029 S/y Paradise just lost a propeller somewhere in the Baltic Sea. We have Volvo Penta D2-75 engines with two blade propellers. Anyone with the same engine configuration knows the correct prop properties? Yours, Miikka S/y Paradise
|
|
lagoon 380 salon fan wiring question
2
does anyone know the path of the starboard salon fan wires? We have lost continuity of the positive wire. ours has the black and red wrapped in electrical tape....perhaps headed forward. tim and tracey folie a deux 2000 L3803 hull #47
|
|
Looking for lagoon in TURKEY
Hi everybody, We are looking for a Lagoon 38,39,40 models 2010 and younger. Max budger 250K USD. Please let me know by PM if you have one in Turkey.
|
Image Name
Sat 8:39am
Sat 8:39am