¿ªÔÆÌåÓý

Sammy, my contact is 00351 919614334 and the email is jsantos@.... Cheers

Hi Sammy, We have a 2016 Lagoon 400 S2, 4 cabins, 2 wc, like new. We are in Portugal, Faro, Algarve.?ENGINES 2 x 45 HP (Yanmar 4JH45), PAIR OF 3-BLADES FOLDING PROPELLERS, CODE 0 RIG AND POLE,

Hi Chris, price is 285tsd€. major refit 2018; like new sails (elvstr?em) solar, bimini hardtop, dingy. the boat is in perfect condition, ?i¡¯ve got a lot of documents and receipts for any kind of

Dear Sammy, I have a 2015 Lagoon 400 S2 Owners Version with 2 x 40HP engines in Cartagena, Spain. It has a square top main, code 0 and a cruising chute, 675 Amps Mastervolt AGM house batteries, 670

If I remember correctly, the sensor is 1.5 feet below the surface and 2.5 feet above the bottom of the keel. I subtracted 2.5 on the settings so the the display always showed ¡°depth below the

I have a Lagoon 410 2002 in excellent condition with lots of upgrade and ready to sail has been sailing for the past 6years located is Florida Envoy¨¦ de mon iPhone

Wondering if anyone can help me out. Does anyone know the offset values of the depth transducer from the waterline and/or bottom of keel for the lagoon 400??

Dear friends, My client is looking for a sailing cat, and not a PC. Please, let me know if one you have a Leopard, Lagoon or Fountain Pajot about 40feet long, less than 10 year old and in ready to

Hi Michael, standard questions: where is it located? ? What is the price? ? What are the factory and aftermarket options installed, what are any know issues mechanically, do you have documented

Like to sell my Lagoon 440 from 2009 4 cabin no chartered

hi, i have a 2004 lagoon 380 fitted with (I¡¯m guessing) standard wheel and hub mechanism. After removing the wheel and hub to access the engine stop cables ( and making a modification so that in

My float was totally grounded. I had spares. So at anchor I did these temporary repairs.

My 2017 42 only has a timer that is button actuated. ?I think the time is a bit short but it works but guest sometime forget to hit the button.

Make sure that the float is really faulty first. In many cases it's the timer team at mechanism. To verify check with a meter for open/short circuit at the terminals of the float. On my 440 I have 2

I had to cut a 4 inch round access hole in base of shower and used a screw in/out deck plate to fill hole. Nothing under the shower base, but be careful not to cut any deeper than the base material.

How can I change the sump shower float in the owners cabin side. The only inspection port in place gets me 12 inches from even touching the backing nut and wires.

They used automobile windshield mastic/caulk on my cabin lite that disappeared. I forget if I used a heat gun and/or multitool to remove the old caulking.

Thanks Dave.? My issue are the windows surrounding the galley out front, including the large curved corner windows.? The above article dealt with a window within the side of the hull''? Different I

If you look on www.aroundncircles.com , you will find detailed instructions with materials, caulks, primers, & solvents written by a very astute technical captain.

Determined yes volvo props.? Standard for L 400 is the 17 x 14 L.? Just in case anyone else may be interested. Thanks for all replies.