开云体育

Looking at that picture, I’m pretty sure that bowsprit tube also extends behind the plate and into the structure. Why do i think this? Because the heads of those fasteners appear nowhere near large

In Australia they sell suitable replacements in shops that sell domestic curtain accessories. Take one as a sample when shopping, can be slightly different shape but work perfectly well. They are not

QUICK. Great service. Easy to get parts. Easy to service, reliable and very strong. Did I mention feat service support. Scott Tracey William & Molly YOLLATA. Lagoon 440 #148 - FOR SALE in NZ. Dream

My 14 year old Leroy-Somers Windlass failed on my Lagoon L-440 (Hull #20; 2004 model year) and this 14 year old Leroy-Somers Windlass is "beyond repair." (Leroy-Somers was purchased by Emerson which

Found it sifting through the Beneteau Spare Parts website, 9500mm on starboard and 8000mm on port. - Brett

Unfortunately could not find the length printed anywhere that was accessible.

Click on "Subscription" Then "Membership" -- Paul Rogers [Moor R&R](https://www.sailblogs.com/member/moorrandr/). Lagoon 450F #233 2013 East Coast of Oz

Brett, the length should be printed on the plastic sheathing of the cable

Part number for curtain hooks is 000409. I ordered a bunch of all curtain items. see attachment for pns.

Thanks, Bill. Do you or anyone else know what the proper length of the starboard shift cable is on a Lagoon 380 S2?? If I order a spare, the starboard length, would work for port, correct? Since it

After getting spares I was able to repair the defective one byt removing the cover, taking the spring off the armature, removing it and cleaning the copper contact area with an emery board. ?It had

Went to Bene online site, can't find these. Does anyone have the PN. Does Ward still work there? You have to use their catalog, but sort of have to know what to start with to drill down... This

If you're lucky thete might be enough extra thread at the upper end to make up the 1/2 inch. In any case have to make sure it is fully in gear in fwd and reverse or it coukd damage the transmission

Is there any place within our accounts that we can place a signature? I can't seem to find one. Thanks! ~LeeV Saving for the L42

I installed this one in the shower pump system on a Lagoon 500 that also uses the Gulper drain pump. There is a bit of a steep learning curve to program it but it works well and has many more

The Gulper pump only requires a 10 amp fuse, so a 10 amp relay will do the job. A variable delay relay is a very good option for the Gulper pump operation, as having a 45 second delay greatly improves

Sheared off the end of our sail drive shift cable, there was a bit of thread left, so I was able to put it back together but it is now a little over 0.5" shorter than it once was. I am curious what

I bought my 2004 Lagoon 43PC in France and have found the owner's manual to be a rather limited resource, even with? the use of a French to English web interpreter! Where are the float valves for the

The OEM bow sprit tube is S/S welded to the fore-saty attachment plate. As per picture.

Hi Group Members - I hope that everyone is pleased with the performance, features, look/ feel of our new group site. Seems to be working flawlessly to me.? Any problems? On any post please include a