开云体育

If your boat does not have a main breaker on the incoming line that is rated at 30 amps, and you provide a 50 amp service to it, worst case is you set your boat on fire. If the pins looked burnt,

First major issues in 10 years, currently in Dominican Republic on our way to the Grenadines... Anyone know of a better set-up, we were caught in a fairly large storm at sea when a large wave broke

Thanks Stuart, I only have the one socket, on the boat to connect too. It is 220 volt/ 30 amp - A local electrician rewired a lead and we plugged it straight into the 125/ 250 volt / 50 amp socket

Thanks Joe, How does the Smart Plug work if we are plugging into 250 volts/ 50 amps - does it step down the amperage to 30 amps?

We will be sailing area where anchorages are not ideal - Vanuatu and threat of sudden wind shift & lee shore is real. Never been in situation like that but there is first time for everything.? Have

Got a quote from Mack Sails . FIVE times the price I have been quoted from a reputable far east sail loft...

Frank: We went through the sail replacement process last summer, and decided to go with Far East Sailmakers. I also thought they must be a "standard" size, on a shelf somewhere, with no luck. We were

It was 1/16 or 3/32 I think.

Tim, How thick of a piece did you use, and what material? ?Aluminum or SS? I was able to source a new end piece from Lagoon. ?For a nominal $1,778.40. ?Or the entire new door for $8k. ?So thinking

Thank you Rob, it is a good piece of advise. I will look for a simililar product locally. Regards Fatih Muslu

If you have access to amazon.com <http://amazon.com/>, this little gadget (or others similar to it; nothing special to this one) is *REALLY* handy for tracing wires. Used it on a house wired by …

We made an 8 in.+\- piece that goes vertically inside the slot. It attaches top and bottom inside the frame of the door. The piece has a slight turn of the edge to make it more rigid. The middle part

You can use a standard cable.? I had the same situation on a 2008 420 and confirmed with Lagoon that both 220 and 110 use the same wiring harness rated for the higher amps for 110.? While buying the

We have 220v as well, with 2 plugs on board. ?They are (guessing off the top of my head) approx 30a and 20a. ?One is house power and one for A/C. ?I spent forever trying to find a way to get to a

The problem is inside the edge track where the locking mechanism is. ?See attached pics. ?The actual door metal has broken around the hole that the lock sits in. ?The problem is that its the metal

Jeff, You may want to get the opinion of a marine electrician because the wiring required for 220v is significantly smaller in gauge than that required for 110v. You may need to rewire your boat on

We have a 2009 Lagoon 440 - 220 v & 30amps. We need to change our power line to suit US connectors. Is there a standard cable that we can use & where can we order it from or do we have to have one

I can't resist. This is old news as many of us have been seeking the holy grail since we got our boats. I was told a long time ago by the Lagoon America manager that the diagram would not be released

I am looking for information on 2007 L420 bow sprit.? We do not have one and are interested to know more about the installation.?? There is a round metal plate that is integral to the head stay

Unfortunately, I have found out it supposedly doesn't exist. I have a 2015 which I have spent many hours doing electrical work on. I asked my dealer for it, he asked his tech contact at lagoon, who