开云体育

After 9 happy years cruising in the Med, the time has come to say goodbye to our SY Dakini (Lagoon 421, hull # 220 - built November 2010). She is registered in Valletta (Malta) and is VAT not paid.

For sale, hull #409, asking $221,900. PM me or see listing #87062 at sailboatlistings.com. Currently located in the Chesapeake

Radman, My door wheels appear to be shot - could be wheels and or wheel frames???? I too have a L400, so can you provide me any more detail on how you removed the sliding window and swapped them out

Just got my wheels back from my local machine shop…$30 for the pair Sent: Friday, July 3, 2020 9:25 AM To: [email protected] Subject: Re: [lagooncatowners] L440msliding door rollers part #

It is ludicrously expensive. ?My wheels were fine but the adjusters were broken so I did not have much of a choice.

Delrin for the wheels. I’ll let you know what he charges. joe Sent: Thursday, July 2, 2020 9:34 AM To: [email protected] Subject: Re: [lagooncatowners] L440msliding door rollers part #

Not so smart, I suffered with it for a while. Then one day I was sitting at the table eating a bowl of cereal and glanced at the door and window together and had a "Duh" moment. 45 minutes later the

Yeah, the price did seem rather extreme. I gave them to my friend in his machine shop to make me a pair of delrim rollers. Swapping with the galley window, very smart. I never thought of that. Joe

I thought this was a ridiculous amount of money to pay for these rollers when all that is needed is to replace the nylon wheel. I plan on just rebuilding mine some rainy day by cannibalizing a set of

Photos should be attached. ?ContactTerry at Beneteau USA at t.richardson@... with your hull number and parts requirements, he has been very helpful.

Well, if you want to add a hatch between the forward cabin and the bow locker it is certainly possible. However, if you want to keep the safety aspect of the locker, you need the hatch to be

Hi scott, do they look like these. I only have 2 of these fitted to my door. Sent: Tuesday, June 30, 2020 9:31 AM To: [email protected] Subject: Re: [lagooncatowners] L440msliding door rollers

When Lagoon builds out the bow birth for sleeping, they put in an escape hatch in the forward cabin bulkhead that is at the level just above the hull bottom in case the cat has flipped in which case

Thanks Steve. Is this what they look like? Joe Sent: Tuesday, June 30, 2020 10:37 AM To: [email protected] Subject: Re: [lagooncatowners] L440msliding door rollers part # please Scott, Do you

Yes. When our L400 was built they fitted it with the bunks in the bow. When they do that, Lagoon adds small 9” hatches on the inner side of the bows for air flow. They also install the larger

Scott, Do you by chance have a picture of them? Wanted to see if they where the same for a 410. Thanks! Steve in Solomons MD 410 S2E

My 2 cents. ?(likely not worth the price) The port side of my 450 is fitted out. ?There is an opening to the forward cabin, but it is covered by the mirror above the bed. ?I view this currently as

I just ordered a set: The runners for the sliding glass door come in a set of four. · 144672 DOOR RUNNER (SET OF 4), two weeks lead time for $153.28

L440msliding door rollers part # please Does anyone have it? Thx Joe

When the water tight bow compartments are fitted out with bunks on a 400, is there a hatch in the bulkhead between the forward cabin and the bow compartment? Is it possible to put a hatch between the