开云体育

Hi Dietmar, Did you find the rigging specs for the L440 ? I am trying to find them Regards Ian Wilbert S/V Deno

Just saw your response.? Thanks for getting back to me.?? -- Bob Goldstein s/v On Watch Lagoon410 hull #38 Westbrook, CT

Hi paul, i have an 410S2 hull #156, everything comes back to the cockpit, it's easy to sail alone. I have two winches to port and one on starboard, they are on top of the roof, the rope clutches are

good morning everybody i am trying to decide whether to move my control lines to the cockpit or leave them at the mast. the main reason for this review of my setup is due to a lot of single handed

Hello, has anyone done a conversion of one toilet to shower closet (standing shower) in L440? I'm interested in turning one toilet into a shower room, as the showers as they are leave a lot to be

Yes we did, here is an excerpt from the email. Hope that helps, ?and thanks for the greetings.

Hi John, did you find a source for replacement rollers? Mine are due for replacement. Hope you both are well and greetings from Wilmington.? Menno

What a great solution! Thanks for sharing! Richard REWIRED Lagoon 40 now in Croatia

I bought an inexpensive metal dock cleat with two mounting holes and a solid base that was slightly wider than the groove in the cap. I ground the width of the base so it fit snuggly in the cap. ?The

I had the same problem. Channel locks and vice grip tore through the wood. I cut this from 5/8" plywood and use a 10" or 12" Crescent Wrench. It works great. Glenn Baldwin Lagoon 380 774 Serenity

That's great advise, thanks John

Attached is the tool I made. Also good for removing mud from the anchor. ;-) I didn't bother making it a "+", as "l" worked just fine. The notch helps me get it level, as ours port was flush with the

So, I haven't tried it yet, but yesterday when I was cleaning my raw water strainer, it occurred to me. The top of the strainer from vetus has the same plus pattern as the water tank just

When I asked the dealer he said Lagoon has one but I never could figure out how to get it.

Thanks Jimmy and David, that’s what I wanted to here and was planning on doing. Just wanted to see if anyone else had done it with success! Steve in Solomons MD 2004 410 S2 E Sent:

Meir, That’s the one I have on a 2004 410. There is also one to lock the slider “window” above the sink on the 410. I don’t understand why it’s not on all models. You can just see the

This is strange. Our L400 has strong locking bolt to secure the door when open. I believe it is a standard feature, the boat was delivered new with the bolt in 2011. Meir Riba S/Y Bat-Yam L400 #

Move with care or break the cap. 2 or 4 hands is good, but sometimes not enough (getting a stronger person can help). Another option is 2 things to fit (snugly) into the ends of the + shape then use

I have tried to open the red plastic inspection ports on the blue plastic water tanks. No go. Tried making a + shaped male to fit into the female out of wood and turn with vice grips. Broke the wood.

Yes we too had problems with the rollers on our 2010 L400 Salt and corrosion set in and seized the roller that eventually developed a flat spot. Still slid but not as easily. Spraying with lubricant