开云体育

I repainted around my salon windows on my Lagoon 380 and it turned out nice. I used a spray paint can made to paint plastic I found at a hardware store. Jimmy Peters

Hi steve. I simply sanded the remaining paint. Polished the window and replaced the top layer is caulking with black. Looks great: zero maintenance in the future. -- —- David

Alistair, I've heard several people say they had no way of latching the door open. On my 410 I have slide bolts (from the factory) installed at both the bottom of the door and at the window frames.

I haven't attempted to take the door off yet but will do so when we haul out in November and perhaps the boat yard can do something similar

Thanks Steve, I will try and reach out to Southco.

Hi About a year ago we stayed some time at Ft Pierce on our L410. It was a good place and open to cats. Nice farmer's market every Saturday and some music tests too. Now in Greece. Ron on Kouka

I had problems with the paint. Ended up by buying vinyls to replace the paint. I’m going to fit them shortly so I will Let you know but from research, I understand that they are much better and

The sliding door on my 421 has always had difficulty mating with the window and clicking shut and locking. This has been made worse by it becoming unlatched when open and then sliding wildly open and

Glen, We have private dock slips available in the Ft Lauderdale area for storage but, not live aboard. Let me know the months you need storage and I can heck availability. Best Regards, Staley Weidman

Hi All, We're looking for a Lagoon-friendly marina somewhere in mid or south Florida for the winter for our first trip south in our 380. Does anyone have any suggestions for decent places with

Has anyone had any luck with repainting the white trim around the main saloon windows? Mine is fading and I need to respray. Thanks in advance. Steve in Solomons MD 410 S2 E

Jeff, This is an ongoing issue with most of the Lagoons. Do you have a picture of the rollers use on the 440? I’ve attached a picture of the 410 Rollers to see if they are the same as yours. I also

My sliding door on our L421 is not working that great either – so would enjoy hearing comments on fixes. Doug Doug Jackson Bleu Lagoon L421 1262 Crooked Tree Ct Westerville, OH 43081 614-519-6996

We have an issue with our sliding door, it appears the rollers are either shot or need adjusting. I just had a domestic sliding door specialist look at it and he did not want to touch it, he said we

Due to time constraints (not mine, the kid's !) we decided to sell our 2008?Lagoon 380 ( http://www.cruisersforum.com/forums/tags/lagoon%20380.html )?S2 called EOS. She is?hull (

techincally the energy comes from the batteries but since the fridge is only switched on? when there is excess power there is never any significant? current drawn from the battery. its simply cutoff

After many years, I am wondering. Our 2006 440 #121 came with two bilge pumps in each hull. The diaphragm run dry pump is wired to the upper helm switch.? No auto activator.? Discharge is aft from

I can concur this works great. I posted pics of my setup a month or so ago here and to cruisersforum.com forum after Rainer had told me of his setup. So following his advice, I have

I have a 2016 450s lagoon. I took the inside measurements to the hatches in the berths over the beds to have some security bars built. I am not currently at my boat and have lost the measurements. Was

We have smart MPPT solar charge controllers by Victron Energy, and they have a load output that can be used for dumping excess energy (configurable, for example turn on if voltage >13,5V and off if it