开云体育

Hi Mike,
?please could you email a friend on?
smbunten@...
Her name is Stephanie Murfreesboro Bunten and is looking for a cat just like your specs.

Good luck and all the best?
Alan?
Lagoon 410s2 Hull #128

We are getting ready to sell our? 2003/04 ? 410 S2? "At Last", never chartered, single owner.
We were wondering if there might be some interest.
She is located South of Tampa Bay, Florida, on the Gulf of Mexico.

I called it a boom-strap/mainsheet-strap. I had one made by Stix-n-Rig'n() in Kemah, TX, US and shipped. The original was 52" circumference(26" folded) but I felt this was too long and caused the mainsheet to rub on our hardtop, so I tightened it up to about 44.5" circumference(folded to 22.25").

Cheers,

Brett

--
?

Hello everyone
We have a Lagoon 380 S2, hull no. 519 and are currently in Colombia. The rope loops around the end of the boom look pretty worn (flat/burned) and we would like to replace them. Does anyone know where to get those and what exactly they are called? Any addresses where to purchase them in the US or Europe?
Thanks a lot! Fair winds from Martin and Anna on PACHAMAMA

Our Australian clients are very pleased with The Multihull Group?rowan@...

Hi Bruce
Rex from Tamata, now Tequila Sunset, Lagoon 440, met you at Palmerston, when you thankfully used your sewing machine to repair my mainsail.?

If if you are looking for as good a place as any and probably better than most, I would suggest Boatworks on the Gold Coast, Qld... google them for more info. ?Everything you need is there along with a choice of brokers, can discuss that with you further at a later date. I sailed from Noumea to Gold Coast, a good run, and plenty of very safe anchorage when you get here. Have a look at google earth.?

Cheers
Rex

Call Tim Vine at YOTI, they are nice people, very straightforward about the process and market and do a very professional job. They are based in Sydney but I think have an office in Brisbane / Gold Coast area as well.

They sold our Lagoon 380 last year in a matter of weeks for right around what we paid for it in the UK several years earlier. Also there’s nice cruising in Pittwater and Sydney if you want to live aboard while you wait for the boat to sell.

Paul Ridley
Due West

I'm in the SW Pacific (Vanuatu) and it looks like I may be selling my 2011 L400 at the end of the season. I've heard the market is good in Australia, but would appreciate any suggestions including locations and dealers where buyers are likely to be found. Reasonable storage fees while it is on the market would also be good. It has new rigging and lots of upgrades.

Thanks,

Bruce

Anyone know the west coast going rate to replace the Sail Drive gasket...Thanks.

Amritha is for sale. She's in Redwood City, Ca.?
Larry Haynie 510-508-1359

The cats are pretty close in size. We tried it on our sons 47 and it worked just rather small for that boat but the Lagoon 40 is only 2ft longer.

Hi Marcus
1. Do you have the equipment on your boat to deploy the gennaker? i.e. bowsprit, dect turning blocks, starboard winch?
2. If you have the above, you need to measure the distance from the spinnaker turning block near mastop to the padeye at the end of the bowsprit.
3. Ask the seller what is the luff length of the sail. It should include the length of his furler if he has any.
4. Compare the dimensions. It probably fits as his boat is smaller.
5. If he does not have a furler, see if the luff length + new roller fits your dimensions taken at point 2.
allways allow few cm freedom at both sides to be able to play around with the actual installation.

--
Brandon Wieschhaus
MESSING ABOUT
L380, #006
Seattle, WA

Hello Carl

I got a L400.? Any idea how that migth fit our oat ?? Anyody with thoughts please chime in.??

Thanks

Hello Carl, My boat is in Pensacola, where are you located? Is the gennaker set up on a furler? I would like to take a look at it. Do you know the age and measurements of the sail?
Thanks Kevin

North Sails aqua and coral gennaker for Lagoon 380S catamaran in bag with all sheets. Excellent condition. $1000 plus shipping and insurance. Presently in northwest Florida carlhawk@...?

Thanks for all the helpful suggestions.? I haven't heard of the bleach idea before so might be worth a try.? Solar fans also seem to be a favourite so we might also have a go at fitting these before the winter.

mark
it has been a while since I asked about this but do you or anybody else have some photos that can show the setup running all lines aft.
just looking for a system that is proven and works well.

thank paul