TS-590SG band data cable?

Chris E. All Messages By This Member #285 I run a TS-590SG, simple to just set up the direct keying, I see that pinout easily enough in the manual. Anyone running a band data cable with one? Is it just a null modem DB9 on each side? Is keying done over that or do I still need the keying cable if I run the band data cable? I use CAT control over the USB interface currently to the PC and software, will enabling the COM port on the rig interrupt that?
[email protected] #286 I'm not sure if this helps, I have the 590SG with the arb704 wired to the LA1K going out to a mfj 998 tuner. I do run the kenwood pc software too. Everything works great, I tune the 998 first with the 590 with the 1k in stby mode and then go live, it automaticly changes bands when the 590 switches bands. It just works. Joe
Chris E. All Messages By This Member #287 Yeah I decided to get the LA-1k and have had it a week or so now. I just love the thing. I set up with just a PTT keying line to test it and hadn't thought about it but I run a doublet with a manual tuner and now know, I just put the LA-1k in standby mode while I tune up with 10W or so and it just band switches during the tuneup process anyway so basically, job done.? No need for the band data cable the way I operate. toggle quoted message Show quoted text On Tue, Mar 31, 2020 at 9:02 AM josephreich via Groups.Io <josephreich=[email protected]> wrote: I'm not sure if this helps, I have the 590SG with the arb704 wired to the LA1K going out to a mfj 998 tuner. I do run the kenwood pc software too. Everything works great, I tune the 998 first with the 590 with the 1k in stby mode and then go live, it automaticly changes bands when the 590 switches bands. It just works. Joe -- 73? de?Chris?-- KC2RGW ------------------------------------------------------------ ˙dn ?p?s ????? ?o??uo? ?no? u?n? ?s???d 's??? ?u?p??? ??? no? ??

Previous Topic Next Topic

开云体育

TS-590SG band data cable?