Keyboard Shortcuts
Likes
Search
Latest Firmware
开云体育1.07b is listed on the Palstar website ? From: [email protected] <[email protected]> On Behalf Of Bernd - KB7AK
Sent: Tuesday, July 28, 2020 1:09 PM To: [email protected] Subject: [la1k] Latest Firmware ? I am feeling really stupid, I cannot find the latest firmware. V1.02E is the latest one mentioned on the site and non of the firmware versions listed is clickable? I hope the latest firmware may help with the noise issues of my device. |
||
开云体育Download the firmware again your first download may be corruptK4OCS? Barry ? On Jul 29, 2020, at 9:19 AM, BJN644 <bartnewhouse@...> wrote:
|
||
|
Also, just be aware all USB B cables are not all wired completely through. It is fairly common to struggle? trying to connect to hardware without realizing as the operating systems don't tell you anything to indicate this, just that your data transfers will fail.? I've had consistently good luck with the TrippLite cables you can find on Amazon as they are used to get data stats and control UPS devices. They also have ferrites on them. On Wed, Jul 29, 2020 at 11:41 AM <davenlr@...> wrote: My friend went through three computers before finding one that worked.? Something about the updating software isnt quite right, or it might be the version of USB drivers, or even the USB chip the computer uses that isnt compat.?? --
73? de?Chris?-- KC2RGW ------------------------------------------------------------ ˙dn ?p?s ????? ?o??uo? ?no? u?n? ?s???d 's??? ?u?p??? ??? no? ?? |
||
|
David Jones
I had to use both a different Win PC AND different USB cable. Also, did not like Amazon Basics USB-A extension cable. Third USB A-B cable worked. The firmware does load fine once you have worked through the PC and USB cable issues. Lastly, follow the instructions as to the sequence to initiate the update - first time i was getting tripped up on the instructions. |
||
开云体育Yes, and I think it has cured my SWR BYPASS problems.Fingers still crossed, however. More on-air time needed for testing. 73, Kent? K9ZTV On 8/19/2020 9:56 AM, David wrote:
There is a newer LA-1K firmware revision on the website (1.07E)? ? |
||
开云体育And with the new 1.07E firmware you may find the log-on screen displays twice which, according to Mark (tech), is to help those whose log-on screens were not displaying at all.73, Kent? K9ZTV On 8/19/2020 10:25 AM, Kent Trimble,
K9ZTV wrote:
|
||
开云体育Yes this new update seems more stable on my end, but not enough testing to determine until contest season. ? I noticed the update notes say: ?Allows hidden menu adjustment of transmit relay sequencing delay to correct false tripping when in direct keying mode, under certain operating conditions. Default relay sequencing delay is 1 ms. Max delay is 5 ms. The menu incorrectly indicates 2 ms through 6 ms for this setting. NOTE: LA-1Ks with serial number below 33728 should be left at a 2 ms default setting when this version is installed. ? This is HIDDEN alright. I cant see it. Is this only for factory adjustments? ? Barry VE6UM ? From: [email protected] [mailto:[email protected]] On Behalf Of Kent Trimble, K9ZTV
Sent: August 19, 2020 9:30 AM To: [email protected] Subject: Re: [la1k] Latest Firmware ? And with the new 1.07E firmware you may find the log-on screen displays twice which, according to Mark (tech), is to help those whose log-on screens were not displaying at all. On 8/19/2020 10:25 AM, Kent Trimble, K9ZTV wrote:
? |
||
开云体育Or maybe I interpreted it wrong and is the Hidden Menu in the Transceiver…. ? From: Barry Ploof [mailto:barplo@...]
Sent: August 19, 2020 11:48 AM To: '[email protected]' Subject: RE: [la1k] Latest Firmware ? Yes this new update seems more stable on my end, but not enough testing to determine until contest season. ? I noticed the update notes say: ?Allows hidden menu adjustment of transmit relay sequencing delay to correct false tripping when in direct keying mode, under certain operating conditions. Default relay sequencing delay is 1 ms. Max delay is 5 ms. The menu incorrectly indicates 2 ms through 6 ms for this setting. NOTE: LA-1Ks with serial number below 33728 should be left at a 2 ms default setting when this version is installed. ? This is HIDDEN alright. I cant see it. Is this only for factory adjustments? ? Barry VE6UM ? From: [email protected] [mailto:[email protected]] On Behalf Of Kent Trimble, K9ZTV ? And with the new 1.07E firmware you may find the log-on screen displays twice which, according to Mark (tech), is to help those whose log-on screens were not displaying at all. On 8/19/2020 10:25 AM, Kent Trimble, K9ZTV wrote:
? |
||
开云体育My amp is just a month old.I went to the hidden menu and made the change Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Barry <barplo@...> Date: 8/19/20 12:48 PM (GMT-06:00) Subject: Re: [la1k] Latest Firmware Yes this new update seems more stable on my end, but not enough testing to determine until contest season. ? I noticed the update notes say: ?Allows hidden menu adjustment of transmit relay sequencing delay to correct false tripping when in direct keying mode, under certain operating conditions. Default relay sequencing delay is 1 ms. Max delay is 5 ms. The menu incorrectly indicates 2 ms through 6 ms for this setting. NOTE: LA-1Ks with serial number below 33728 should be left at a 2 ms default setting when this version is installed. ? This is HIDDEN alright. I cant see it. Is this only for factory adjustments? ? Barry VE6UM ? From: [email protected] [mailto:[email protected]] On Behalf Of Kent Trimble, K9ZTV ? And with the new 1.07E firmware you may find the log-on screen displays twice which, according to Mark (tech), is to help those whose log-on screens were not displaying at all. On 8/19/2020 10:25 AM, Kent Trimble, K9ZTV wrote:
? |
Barry K4OCS