开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. La1k
  2. Topics

Disabling amplification on a specific antenna port

 

I got the la-1k and hf-auto this weekend.? I also have the ICOM AT-130 (100W) mounted outside.

Is it possible to specify the LA-1K to never amplify the signal on one of the antenna port so I can safely connect the AT-130 to it?? It would be nice if it could, that way I wouldn't need a separate antenna switch.

I guess there is another question I probably should ask.? Could I just run an coax from the HF-AUTO tuner to the wire into the tree and connect the center conductor to it and the shield to ground and thus skipping the AT-130 all together?

Thanks,
? Claus (K0TET)
 

Claus??have the same equipment and don't see the advantage or disadvantage of using?another tuner,? ?
A separate switch would have to be in line with the radio that selects either tuner
that you wanted to use and then the antenna?you want.? ?Don't see another option.

73
Mike KR9G


.

On Mon, Dec 2, 2019 at 11:16 AM Claus (K0TET) <claus-groupsio@...> wrote:

I got the la-1k and hf-auto this weekend.? I also have the ICOM AT-130 (100W) mounted outside.

Is it possible to specify the LA-1K to never amplify the signal on one of the antenna port so I can safely connect the AT-130 to it?? It would be nice if it could, that way I wouldn't need a separate antenna switch.

I guess there is another question I probably should ask.? Could I just run an coax from the HF-AUTO tuner to the wire into the tree and connect the center conductor to it and the shield to ground and thus skipping the AT-130 all together?

Thanks,
? Claus (K0TET)

1 - 2 of 2