开云体育

New amp concerns

N1UB All Messages By This Member #5 Hello, Just picked up a new LA-1K to go with my HF-Auto. My first concern is that I think I have a sticky relay, I'm getting an intermittent transmit delay, and the display on the Amp says "TX Wait" anyone one else experience this ? The other is which power meter is more accurate ? the bar meter on the amp or the numerical on the HF-Auto because they both read different. Thanks?
Rich McCabe #6 开云体育 I think the wait signal comes up when you close the PTT switch but have not sent power down the coax. So if you key on SSB and don’t talk, you will see wait. ? The bar graph on my LA-1k is no where close to accurate.? My HF-Auto matches my LP-100 pretty close but the L1-1K does not. ? Rich ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of BJN644 Sent: Sunday, April 22, 2018 2:40 PM To: [email protected] Subject: [la1k] New amp concerns ? Hello, Just picked up a new LA-1K to go with my HF-Auto. My first concern is that I think I have a sticky relay, I'm getting an intermittent transmit delay, and the display on the Amp says "TX Wait" anyone one else experience this ? The other is which power meter is more accurate ? the bar meter on the amp or the numerical on the HF-Auto because they both read different. Thanks?
N1UB All Messages By This Member #16 Can anyone from Palstar address my relay concern and the "TX WAIT " ?? Thanks
Pete Kovacs All Messages By This Member #17 Best thing to do is call us. If it says TX wait that's normally what you get when you ground the push to talk line, but RF is not being applied. Call us and we'll explain everything:?800-773-793.

Previous Topic Next Topic