开云体育

Hi,

Many times it is required to place multible components of the same
type in eeschema.

After placing a component, when one attempts to place the next
component, the place component selection window should directly show
the last component placed, so that one can directly click 'OK'.
Presently, one has select repeatedly the component from 'History'.

Also, while directly placing components like this, the last
orientation(rotation etc) of the component may be remembered.

This is useful while placing LEDs, resistor arrays etc.

Regards,

--Royce.

--- Royce Pereira <roycejp@...> wrote:

Hi,

Many times it is required to place multible
components of the same
type in eeschema.

After placing a component, when one attempts to
place the next
component, the place component selection window
should directly show
the last component placed, so that one can directly
click 'OK'.
Presently, one has select repeatedly the component
from 'History'.

Also, while directly placing components like this,
the last
orientation(rotation etc) of the component may be
remembered.

This is useful while placing LEDs, resistor arrays
etc.

Regards,

--Royce.

I'll second that, keep the last selected component
active at the pointer. Also, when copying an already
configured component, value, footprint etc. Very
useful when making an array of the same component.

- YD.




__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005